Nadacop's Photos

View Profile

20161011 01 155848a

20161011 01 155848a

0 2016/10/12 20:17:52 Nadacop

20161011 02 155916

20161011 02 155916

0 2016/10/12 20:17:52 Nadacop

20161011 03 155931a

20161011 03 155931a

0 2016/10/12 20:02:40 Nadacop

20161011 04 160021a - I'll cut the screws down when I am more comfortable with the holding power. I can always cut down and dab some rtv on the inside threads. We'll see.

20161011 04 160021a - I'll cut the screws down when I am more comfortable with the holding power. I can always cut down and dab some rtv on the inside threads. We'll see.

0 2016/10/12 20:02:40 Nadacop

20161011 05 tail final 1 - Only people that will notice the gap above the light are in the know... But, to add, that could get me some more ventilation out the rear for the r/r... mmmmaybe...

20161011 05 tail final 1 - Only people that will notice the gap above the light are in the know... But, to add, that could get me some more ventilation out the rear for the r/r... mmmmaybe...

0 2016/10/12 20:02:40 Nadacop

20161011 r r swap 06a - After swap. I rec'd a picture from Mister Electrical tech support (lower left insert pic) on how to wire it. The stock one is placed there just for comparison. I also installed an old PC cooling fan to see if it will help... I have no baseline tho for performance levels. I mmmmay duct the fan in the future... ahhhhhh pipe dreams...

20161011 r r swap 06a - After swap. I rec'd a picture from Mister Electrical tech support (lower left insert pic) on how to wire it. The stock one is placed there just for comparison. I also installed an old PC cooling fan to see if it will help... I have no baseline tho for performance levels. I mmmmay duct the fan in the future... ahhhhhh pipe dreams...

0 2016/10/12 17:55:28 Nadacop

20161006 r r swap 02a - Pic for size difference. I'm holding the old one over the new mounted one.

20161006 r r swap 02a - Pic for size difference. I'm holding the old one over the new mounted one.

0 2016/10/12 17:55:28 Nadacop

20161006 r r swap 01a - before I cut the old plug out. BTW, I did not have to alter the holes at all. I just needed longer bolts. Old wiring layout for reference.

20161006 r r swap 01a - before I cut the old plug out. BTW, I did not have to alter the holes at all. I just needed longer bolts. Old wiring layout for reference.

0 2016/10/12 17:55:28 Nadacop