SuperHawk Forum
Back
Back
0 2013/07/21 12:11:32
Bottom Hooks
Bottom Hooks
0 2013/07/21 12:11:32
Right
Right
0 2013/07/21 12:11:07
Left
Left
0 2013/07/21 12:11:07
Front
Front
0 2013/07/21 12:11:07
Stacks removed and shown as they would be in the forks
Stacks removed and shown as they would be in the forks
0 2013/07/12 10:46:54
Compression valving removed from the base
Compression valving removed from the base
0 2013/07/12 10:45:34
Use hex head screw to tap in the compression stacking to access the retaining ring
Use hex head screw to tap in the compression stacking to access the retaining ring
0 2013/07/12 10:45:34
New stack
New stack
0 2013/07/12 10:45:34
Picture of the fork taken appart as far as the shop manual tells you to go (If your bushings and fork seals are in good repair, you do not need to remove the stanchion from the fork tube)
Picture of the fork taken appart as far as the shop manual tells you to go (If your bushings and fork seals are in good repair, you do not need to remove the stanchion from the fork tube)
0 2013/07/12 10:28:49
Preload assembly on the rod
Preload assembly on the rod
0 2013/07/12 10:28:49
Remove the bottom hex head screw, you may need to reassemble the spring, washers, preload spacer and nut to stop the assembly from moving in the tube. (This is the bolt that stripped on me on the right side)
Remove the bottom hex head screw, you may need to reassemble the spring, washers, preload spacer and nut to stop the assembly from moving in the tube. (This is the bolt that stripped on me on the right side)
0 2013/07/12 10:25:06
Order of washer, spacer, washer, indented collar. In back ground, fork cap, the rebound rod comes out as part of the assembly
Order of washer, spacer, washer, indented collar. In back ground, fork cap, the rebound rod comes out as part of the assembly
0 2013/07/12 10:25:06
Order again
Order again
0 2013/07/12 10:25:06
Fork cap taken off, exposes the jam nut
Fork cap taken off, exposes the jam nut
0 2013/07/12 10:23:16
Rock guard and dust seal removed
Rock guard and dust seal removed
0 2013/07/12 10:23:16
Remove rock guard and dust seat
Remove rock guard and dust seat
0 2013/07/12 10:23:16
Radial MCs mock up
Radial MCs mock up
0 2013/07/08 21:09:50
Final product
Final product
0 2013/05/25 20:21:14
Bar end removal
Bar end removal
0 2013/05/25 20:21:14
Bar end removal
Bar end removal
0 2013/05/25 20:21:14
Amount the forks moved to make reservoir clearance
Amount the forks moved to make reservoir clearance
0 2013/05/25 20:16:50
in process on clutch side
in process on clutch side
0 2013/05/25 20:16:50
Full garage...
Full garage...
0 2013/05/25 20:16:50
First mock up
First mock up
0 2013/05/25 20:13:51
Stock bars
Stock bars
0 2013/05/25 20:13:51
Before/After media blasting
Before/After media blasting
0 2013/05/25 20:13:51
Jardine Exhaust shipment by captainchaos
Jardine Exhaust shipment by captainchaos
0 2013/08/28 19:53:50
Exhaust rash full
Exhaust rash full
0 2013/08/19 18:56:23
Exhaust rash close
Exhaust rash close
0 2013/08/19 18:56:23
Exhaust clean full
Exhaust clean full
0 2013/08/19 18:56:23
Pit Bull headlift stand
Pit Bull headlift stand
0 2013/07/09 14:35:53
Final Assem
Final Assem
0 2013/05/31 19:02:59
Final Assem
Final Assem
0 2013/05/31 19:01:44
Final Assem
Final Assem
0 2013/05/31 19:01:44
Final Assem
Final Assem
0 2013/05/31 19:01:44
Before clear
Before clear
0 2013/05/29 18:15:22
Before clear
Before clear
0 2013/05/29 18:15:22
Before clear
Before clear
0 2013/05/29 18:15:22
Whoops on the taping that needed to be fixed
Whoops on the taping that needed to be fixed
0 2013/05/29 18:11:57