SuperHawk Forum
rearsets el cheapo. No more draggin. Well unless like when we slid her down the road on that engine case . haha
rearsets el cheapo. No more draggin. Well unless like when we slid her down the road on that engine case . haha
0 2010/08/07 20:08:44
Homemade rearsets: 1" rearwards, 1.5" upwards. Can see the 1" spacer in front of the shifter rubber parallel to chain. There's a similar 1.5" flat alum with 2 holes at the rear, attaches to the exh clamp hidden by the peg.. Essentially just rotates counterclockwise. Simple and practical, like me. haha
Homemade rearsets: 1" rearwards, 1.5" upwards. Can see the 1" spacer in front of the shifter rubber parallel to chain. There's a similar 1.5" flat alum with 2 holes at the rear, attaches to the exh clamp hidden by the peg.. Essentially just rotates counterclockwise. Simple and practical, like me. haha
0 2010/08/07 20:08:44
$5.00 and 1 hour rearsets. Puts your boots even with the top of the swingarm. Good clearance now.
$5.00 and 1 hour rearsets. Puts your boots even with the top of the swingarm. Good clearance now.
0 2010/08/07 20:08:44
DSC00203 Rear TDC cam lobes. Front cam lobes(opposite)point up and out at TDC.
DSC00203 Rear TDC cam lobes. Front cam lobes(opposite)point up and out at TDC.
0 2011/01/14 15:34:35
DSC00207 The price of keeping your fish happy. This little Laguna pump keeps on pumping water @ 600 gal an hour. Nice riding weather too huh!
DSC00207 The price of keeping your fish happy. This little Laguna pump keeps on pumping water @ 600 gal an hour. Nice riding weather too huh!
0 2011/01/14 15:38:21
DSC00213 After valve adjustment, carbs needed synced, a hair! Carbs were not removed or otherwise disturbed during valve shim changes. Significant change in adjustment:added.002in intakes and.003in. exhausts, to plus one on both, .007in and .013in. Good time to do the CCT mod too.
DSC00213 After valve adjustment, carbs needed synced, a hair! Carbs were not removed or otherwise disturbed during valve shim changes. Significant change in adjustment:added.002in intakes and.003in. exhausts, to plus one on both, .007in and .013in. Good time to do the CCT mod too.
0 2011/01/14 15:38:21
DSC00211 Bought a new milling machine for reducing valve shim size. Expensive, but works well.
DSC00211 Bought a new milling machine for reducing valve shim size. Expensive, but works well.
0 2011/01/14 15:41:28
DSC00212 SH is in hibernation; BRP wants to go though! Hot grips and hand covers help keep hands warm. Probably have to sandblast the salt and grime off, but that goes with the territory.
DSC00212 SH is in hibernation; BRP wants to go though! Hot grips and hand covers help keep hands warm. Probably have to sandblast the salt and grime off, but that goes with the territory.
0 2011/01/14 15:41:28
DSC00195 It's my duck. No, don't think so. Two hardheads. haha We'll see who wins this argument. Like some of us on the forum huh. lol
DSC00195 It's my duck. No, don't think so. Two hardheads. haha We'll see who wins this argument. Like some of us on the forum huh. lol
0 2011/01/14 15:51:53