SuperHawk Forum
0 2020/08/18 07:44:49
My loves. 😍🔥
My loves. 😍🔥
0 2020/08/28 07:33:40
Best booties ever. 😂🙌
Best booties ever. 😂🙌
0 2020/08/28 07:33:46
0 2020/08/28 07:57:33
0 2020/08/28 08:01:55
0 2020/08/28 08:05:37
0 2020/08/28 08:09:41
0 2020/08/30 17:41:31
0 2020/08/30 17:41:41
0 2020/09/13 08:07:15
0 2020/09/13 08:07:17
0 2020/09/13 08:07:23
0 2020/09/19 09:50:20
0 2020/09/23 19:20:14
16/ 43 520 chain and sprockets for better gearing.
16/ 43 520 chain and sprockets for better gearing.
0 2020/09/23 19:20:20
CBR600F4i calipers, master cylinder, and levers for better braking. Even got a new reservoir cap. 😂😉
CBR600F4i calipers, master cylinder, and levers for better braking. Even got a new reservoir cap. 😂😉
0 2020/09/23 19:20:26
I'm going to chop off the rear foot peg retainers and smooth them out as I'll never have a passenger on the bike to worry about. Got these as spares from a member here for which I'm grateful. These should be fun and will look good once done.
I'm going to chop off the rear foot peg retainers and smooth them out as I'll never have a passenger on the bike to worry about. Got these as spares from a member here for which I'm grateful. These should be fun and will look good once done.
0 2020/09/23 19:24:29
2 bar radiator caps for higher boiling point and waiting on the red Samco hoses to arrive so I can redo the cooling system. Hadn't decided if I should use the factory hose clamps or get a set of Samco clamps. 🤔🤷🏼‍♂️
2 bar radiator caps for higher boiling point and waiting on the red Samco hoses to arrive so I can redo the cooling system. Hadn't decided if I should use the factory hose clamps or get a set of Samco clamps. 🤔🤷🏼‍♂️
0 2020/09/23 19:27:19
Front and rear wheel bearings and fork bearings too. Got some good lithium based waterproof grease to keep things nice and lubed.
Front and rear wheel bearings and fork bearings too. Got some good lithium based waterproof grease to keep things nice and lubed.
0 2020/09/23 19:27:58
Caliper rebuild kits for the F4i calipers and rebuild kit for the master cylinder kit too. New levers as well.
Caliper rebuild kits for the F4i calipers and rebuild kit for the master cylinder kit too. New levers as well.
0 2020/09/23 19:33:04
Yup got the R/R MOSFET thingamabob to help with the consistency of the charge and with my vast electronic background I'll be upgrading grounds and wiring as needed for a tip top electrical system. Bought 5 weather proof Bosch relay setups for various places and should be fun.
Yup got the R/R MOSFET thingamabob to help with the consistency of the charge and with my vast electronic background I'll be upgrading grounds and wiring as needed for a tip top electrical system. Bought 5 weather proof Bosch relay setups for various places and should be fun.
0 2020/09/23 19:33:22
Love these PitBull stands so far and found if you put a 2x4 under the kick stand the bike is almost vertical and stable enough to use the rear stand to lift and support the bike without any worries.
Love these PitBull stands so far and found if you put a 2x4 under the kick stand the bike is almost vertical and stable enough to use the rear stand to lift and support the bike without any worries.
0 2020/09/23 19:33:57
Got my lower belly pan and it looks great. 😍🔥
Got my lower belly pan and it looks great. 😍🔥
0 2020/09/23 19:40:24
Krieger mcct's and block off plates.
Krieger mcct's and block off plates.
0 2020/09/23 19:40:31
And finally my Coerce fork brace, shifter brace bushing, and race boy looking oil cap. 😂😜
And finally my Coerce fork brace, shifter brace bushing, and race boy looking oil cap. 😂😜
0 2020/09/23 19:40:38
This will also be installed on the rear and yes I'm keeping it Yellow. Love that color and will add a nice contrast to the sea of red on the bike.
This will also be installed on the rear and yes I'm keeping it Yellow. Love that color and will add a nice contrast to the sea of red on the bike.
0 2020/09/23 19:40:45
New frame sliders for that just in case. 😬😳
New frame sliders for that just in case. 😬😳
0 2020/11/19 07:06:51
ProBolts wind screen bolts and fairing bolts in 7075-T6 aluminum. eBay bolt kits are junk. 🤮
ProBolts wind screen bolts and fairing bolts in 7075-T6 aluminum. eBay bolt kits are junk. 🤮
0 2020/11/19 07:06:58
Samco hose kit with a hose clamp kit for the steed. 👍
Samco hose kit with a hose clamp kit for the steed. 👍
0 2020/11/19 07:07:06
Mirror extensors so I can use the factory mirrors and not have to worry about modifying something to fit.
Mirror extensors so I can use the factory mirrors and not have to worry about modifying something to fit.
0 2020/11/19 07:07:12
Yup after 22 years I figured why not.
Yup after 22 years I figured why not.
0 2020/11/19 07:07:18
Oh yeah and in a sexy red dress. 😍😉 Should smooth things out a bit.
Oh yeah and in a sexy red dress. 😍😉 Should smooth things out a bit.
0 2020/11/19 07:07:24
I've always liked the EBC brand so I went with it. 🤷🏼‍♂️🤟
I've always liked the EBC brand so I went with it. 🤷🏼‍♂️🤟
0 2020/11/19 07:07:34
Front rotor sexiness with steel rotor and aluminum hub. Yup bling it is. 😍🤟
Front rotor sexiness with steel rotor and aluminum hub. Yup bling it is. 😍🤟
0 2020/11/19 07:07:46
Fresh cut with the hole saw.
Fresh cut with the hole saw.
0 2020/11/19 07:27:31
Finished product and looks so good. 😍
Finished product and looks so good. 😍
0 2020/11/19 07:27:42
Side view and again looks great. 👍
Side view and again looks great. 👍
0 2020/11/19 07:27:52
This is the before.
This is the before.
0 2020/11/19 07:31:06
And the after. Much cleaner looking.
And the after. Much cleaner looking.
0 2020/11/19 07:31:14
This is the spare set I got off fleabay for modifying. I'm keeping my originals just in case I need them. 👍
This is the spare set I got off fleabay for modifying. I'm keeping my originals just in case I need them. 👍
0 2020/11/19 07:34:37