SuperHawk Forum
Share Your Pictures with Our Community. Upload Now
Krieger mcct's and block off plates.
Krieger mcct's and block off plates.
0 2020/09/23 19:40:31
Got my lower belly pan and it looks great. 😍🔥
Got my lower belly pan and it looks great. 😍🔥
0 2020/09/23 19:40:24
Love these PitBull stands so far and found if you put a 2x4 under the kick stand the bike is almost vertical and stable enough to use the rear stand to lift and support the bike without any worries.
Love these PitBull stands so far and found if you put a 2x4 under the kick stand the bike is almost vertical and stable enough to use the rear stand to lift and support the bike without any worries.
0 2020/09/23 19:33:57
Yup got the R/R MOSFET thingamabob to help with the consistency of the charge and with my vast electronic background I'll be upgrading grounds and wiring as needed for a tip top electrical system. Bought 5 weather proof Bosch relay setups for various places and should be fun.
Yup got the R/R MOSFET thingamabob to help with the consistency of the charge and with my vast electronic background I'll be upgrading grounds and wiring as needed for a tip top electrical system. Bought 5 weather proof Bosch relay setups for various places and should be fun.
0 2020/09/23 19:33:22
Caliper rebuild kits for the F4i calipers and rebuild kit for the master cylinder kit too. New levers as well.
Caliper rebuild kits for the F4i calipers and rebuild kit for the master cylinder kit too. New levers as well.
0 2020/09/23 19:33:04
Front and rear wheel bearings and fork bearings too. Got some good lithium based waterproof grease to keep things nice and lubed.
Front and rear wheel bearings and fork bearings too. Got some good lithium based waterproof grease to keep things nice and lubed.
0 2020/09/23 19:27:58
2 bar radiator caps for higher boiling point and waiting on the red Samco hoses to arrive so I can redo the cooling system. Hadn't decided if I should use the factory hose clamps or get a set of Samco clamps. 🤔🤷🏼‍♂️
2 bar radiator caps for higher boiling point and waiting on the red Samco hoses to arrive so I can redo the cooling system. Hadn't decided if I should use the factory hose clamps or get a set of Samco clamps. 🤔🤷🏼‍♂️
0 2020/09/23 19:27:19
I'm going to chop off the rear foot peg retainers and smooth them out as I'll never have a passenger on the bike to worry about. Got these as spares from a member here for which I'm grateful. These should be fun and will look good once done.
I'm going to chop off the rear foot peg retainers and smooth them out as I'll never have a passenger on the bike to worry about. Got these as spares from a member here for which I'm grateful. These should be fun and will look good once done.
0 2020/09/23 19:24:29
CBR600F4i calipers, master cylinder, and levers for better braking. Even got a new reservoir cap. 😂😉
CBR600F4i calipers, master cylinder, and levers for better braking. Even got a new reservoir cap. 😂😉
0 2020/09/23 19:20:26
16/ 43 520 chain and sprockets for better gearing.
16/ 43 520 chain and sprockets for better gearing.
0 2020/09/23 19:20:20
0 2020/09/23 19:20:14
0 2020/09/23 18:13:37
Advertisement
0 2020/09/20 10:39:23
0 2020/09/20 10:39:20
0 2020/09/20 10:39:18
0 2020/09/20 10:39:16
0 2020/09/20 10:39:14
0 2020/09/20 10:39:12
0 2020/09/20 10:39:10
0 2020/09/20 10:39:08
0 2020/09/20 10:39:06
0 2020/09/20 10:39:05
0 2020/09/20 10:39:02
0 2020/09/20 10:39:00
0 2020/09/20 10:38:58
0 2020/09/20 10:38:54
0 2020/09/20 10:38:50
0 2020/09/20 10:38:25
0 2020/09/20 10:38:22
0 2020/09/20 10:38:19
0 2020/09/20 10:38:14
0 2020/09/20 10:38:11
Advertisement