SuperHawk Forum
Share Your Pictures with Our Community. Upload Now
Superhawk
Superhawk
0 2013/04/30 19:47:28
Assembly before paint to check for cracks, one found
Assembly before paint to check for cracks, one found
0 2013/04/27 20:58:37
Rear solo cowl and front wheel cover before bondo and prime
Rear solo cowl and front wheel cover before bondo and prime
0 2013/04/20 21:26:27
Got rid of the mold mark, final prim
Got rid of the mold mark, final prim
0 2013/04/20 21:19:23
Targa Formula II cowl, BTW 1tail has horrible customer service and tech support. Final prime. Excellent product and fitment.
Targa Formula II cowl, BTW 1tail has horrible customer service and tech support. Final prime. Excellent product and fitment.
0 2013/04/20 21:19:23
Final prime
Final prime
0 2013/04/20 21:17:56
The day I picked her up
The day I picked her up
0 2013/04/20 21:09:00
Unsanded fairing repair
Unsanded fairing repair
0 2013/04/20 21:07:24
Unsanded fairing repair
Unsanded fairing repair
0 2013/04/20 21:07:24
Unsanded fairing repair
Unsanded fairing repair
0 2013/04/20 21:07:24
The tape line is part of the long crack
The tape line is part of the long crack
0 2013/04/20 21:02:48
Final tank bondo
Final tank bondo
0 2013/04/20 21:02:48
Advertisement
Rear fairing bumper repair and bondo blocked
Rear fairing bumper repair and bondo blocked
0 2013/04/20 21:02:48
Bumper repair prep
Bumper repair prep
0 2013/04/20 20:56:49
Rough blocking
Rough blocking
0 2013/04/20 20:56:49
Spot prime
Spot prime
0 2013/04/20 20:56:49
Bondo the dent
Bondo the dent
0 2013/04/20 20:53:38
Spot prime
Spot prime
0 2013/04/20 20:53:38
Final prime
Final prime
0 2013/04/20 20:53:38
Inside fairing repair
Inside fairing repair
0 2013/04/20 20:51:40
Dent in tank, ground off the honda wings and DA'd the surface.
Dent in tank, ground off the honda wings and DA'd the surface.
0 2013/04/20 20:51:40
Cleaning up the rear end
Cleaning up the rear end
0 2013/04/20 20:51:40
Primed, added a 2 more coats with 400 grit sanding before the paint job.
Primed, added a 2 more coats with 400 grit sanding before the paint job.
0 2013/04/16 06:17:45
Finished
Finished
0 2013/04/16 06:17:45
Finished
Finished
0 2013/04/16 06:17:45
crap load of sanding, had to use fiberglass repair on holes and cracks
crap load of sanding, had to use fiberglass repair on holes and cracks
0 2013/04/16 06:16:39
finished tank
finished tank
0 2013/04/16 06:16:39
Just the engine sitting on what used to be my Custom beer pong table. lol
Just the engine sitting on what used to be my Custom beer pong table. lol
0 2013/04/10 11:41:31
After having to remove the tires anyway, (could see the belt), I decided to rip the bike all the way down.
After having to remove the tires anyway, (could see the belt), I decided to rip the bike all the way down.
0 2013/04/10 11:36:35
Had the rubber taken off the rims for a $20 tip. That guy was a d*ck, and still put a couple nice gouges that I now need to try and polish out.
Had the rubber taken off the rims for a $20 tip. That guy was a d*ck, and still put a couple nice gouges that I now need to try and polish out.
0 2013/04/10 11:36:35
I know now that I should not have done this, but I was able to pull my frame off without removing two of the Castle bolts. I did not have the tool, so I used the Hammer and Screwdriver method to remove one of them.
I know now that I should not have done this, but I was able to pull my frame off without removing two of the Castle bolts. I did not have the tool, so I used the Hammer and Screwdriver method to remove one of them.
0 2013/04/10 11:36:35
New red LED's
New red LED's
0 2013/04/03 03:22:32
Advertisement