SuperHawk Forum
Share Your Pictures with Our Community. Upload Now
july 2013
july 2013
0 2013/07/17 13:43:04
clean
clean
0 2013/07/17 13:43:04
Receiver cut out
Receiver cut out
0 2013/07/13 16:05:06
Cheek pad
Cheek pad
0 2013/07/13 16:02:23
Top view
Top view
0 2013/07/13 15:59:01
Adaptive mount
Adaptive mount
0 2013/07/13 15:54:24
IGP4783
IGP4783
0 2013/07/12 22:39:13
Stacks removed and shown as they would be in the forks
Stacks removed and shown as they would be in the forks
0 2013/07/12 10:46:54
New stack
New stack
0 2013/07/12 10:45:34
Use hex head screw to tap in the compression stacking to access the retaining ring
Use hex head screw to tap in the compression stacking to access the retaining ring
0 2013/07/12 10:45:34
Compression valving removed from the base
Compression valving removed from the base
0 2013/07/12 10:45:34
Preload assembly on the rod
Preload assembly on the rod
0 2013/07/12 10:28:49
Advertisement
Picture of the fork taken appart as far as the shop manual tells you to go (If your bushings and fork seals are in good repair, you do not need to remove the stanchion from the fork tube)
Picture of the fork taken appart as far as the shop manual tells you to go (If your bushings and fork seals are in good repair, you do not need to remove the stanchion from the fork tube)
0 2013/07/12 10:28:49
Order again
Order again
0 2013/07/12 10:25:06
Order of washer, spacer, washer, indented collar. In back ground, fork cap, the rebound rod comes out as part of the assembly
Order of washer, spacer, washer, indented collar. In back ground, fork cap, the rebound rod comes out as part of the assembly
0 2013/07/12 10:25:06
Remove the bottom hex head screw, you may need to reassemble the spring, washers, preload spacer and nut to stop the assembly from moving in the tube. (This is the bolt that stripped on me on the right side)
Remove the bottom hex head screw, you may need to reassemble the spring, washers, preload spacer and nut to stop the assembly from moving in the tube. (This is the bolt that stripped on me on the right side)
0 2013/07/12 10:25:06
Remove rock guard and dust seat
Remove rock guard and dust seat
0 2013/07/12 10:23:16
Rock guard and dust seal removed
Rock guard and dust seal removed
0 2013/07/12 10:23:16
Fork cap taken off, exposes the jam nut
Fork cap taken off, exposes the jam nut
0 2013/07/12 10:23:16
IGP4827
IGP4827
0 2013/07/12 09:28:25
IGP4840
IGP4840
1 2013/07/12 09:25:03
IGP4771
IGP4771
0 2013/07/12 09:06:22
IGP4555
IGP4555
0 2013/07/11 12:41:42
IGP4648
IGP4648
0 2013/07/11 12:39:16
IGP4518
IGP4518
0 2013/07/11 12:32:48
IGP4553
IGP4553
0 2013/07/11 12:32:48
3
3
0 2013/07/10 06:28:54
Pit Bull headlift stand
Pit Bull headlift stand
0 2013/07/09 14:35:53
Radial MCs mock up
Radial MCs mock up
0 2013/07/08 21:09:50
CAM00313
CAM00313
0 2013/06/23 15:18:52
CAM00324
CAM00324
0 2013/06/23 15:18:52
CAM00317
CAM00317
0 2013/06/23 15:18:52
Advertisement