SuperHawk Forum
Share Your Pictures with Our Community. Upload Now
on the bike
on the bike
0 2016/10/31 07:45:53
The lower legs are looking even nicer with some bling attached to them! I'm super happy with the way this is coming out!!!!
The lower legs are looking even nicer with some bling attached to them! I'm super happy with the way this is coming out!!!!
0 2016/10/29 08:52:56
IMG 9205
IMG 9205
0 2016/10/29 08:52:31
Even though they have been done for two weeks, I finally got my fork legs and triples back from the powdercoaters. Now I just need the time for the rebuild...
Even though they have been done for two weeks, I finally got my fork legs and triples back from the powdercoaters. Now I just need the time for the rebuild...
0 2016/10/29 06:31:51
My fustration after leaving my bike on a corner for 9 hours and running a mile in full gear. The day after I asked if the engine really sounded ok...
My fustration after leaving my bike on a corner for 9 hours and running a mile in full gear. The day after I asked if the engine really sounded ok...
0 2016/10/28 09:56:28
Not on tds and one says tdc the other says 1/4 turn to go...
Not on tds and one says tdc the other says 1/4 turn to go...
0 2016/10/28 09:56:28
Dont look broken but it sure is
Dont look broken but it sure is
2 2016/10/28 09:56:28
I liked it bit it looked a bit shamoo....
I liked it bit it looked a bit shamoo....
0 2016/10/26 20:03:40
tried to undercut it like the rc dunno if I like it.
tried to undercut it like the rc dunno if I like it.
0 2016/10/26 20:03:40
not a fan of the height but the tail does not come up ti the tank...
not a fan of the height but the tail does not come up ti the tank...
0 2016/10/26 20:03:40
added morebto it with the last of the glue maybe by payday I will have the last of the tail added and filled. supposed to be a winter project.
added morebto it with the last of the glue maybe by payday I will have the last of the tail added and filled. supposed to be a winter project.
0 2016/10/21 23:27:55
starting to look more like a real buck.
starting to look more like a real buck.
0 2016/10/21 22:48:36
Advertisement
20161011 02 155916
20161011 02 155916
0 2016/10/12 20:17:52
20161011 01 155848a
20161011 01 155848a
0 2016/10/12 20:17:52
20161011 05 tail final 1 - Only people that will notice the gap above the light are in the know... But, to add, that could get me some more ventilation out the rear for the r/r... mmmmaybe...
20161011 05 tail final 1 - Only people that will notice the gap above the light are in the know... But, to add, that could get me some more ventilation out the rear for the r/r... mmmmaybe...
0 2016/10/12 20:02:40
20161011 04 160021a - I'll cut the screws down when I am more comfortable with the holding power. I can always cut down and dab some rtv on the inside threads. We'll see.
20161011 04 160021a - I'll cut the screws down when I am more comfortable with the holding power. I can always cut down and dab some rtv on the inside threads. We'll see.
0 2016/10/12 20:02:40
20161011 03 155931a
20161011 03 155931a
0 2016/10/12 20:02:40
20161011 r r swap 06a - After swap. I rec'd a picture from Mister Electrical tech support (lower left insert pic) on how to wire it. The stock one is placed there just for comparison. I also installed an old PC cooling fan to see if it will help... I have no baseline tho for performance levels. I mmmmay duct the fan in the future... ahhhhhh pipe dreams...
20161011 r r swap 06a - After swap. I rec'd a picture from Mister Electrical tech support (lower left insert pic) on how to wire it. The stock one is placed there just for comparison. I also installed an old PC cooling fan to see if it will help... I have no baseline tho for performance levels. I mmmmay duct the fan in the future... ahhhhhh pipe dreams...
0 2016/10/12 17:55:28
20161006 r r swap 01a - before I cut the old plug out. BTW, I did not have to alter the holes at all. I just needed longer bolts. Old wiring layout for reference.
20161006 r r swap 01a - before I cut the old plug out. BTW, I did not have to alter the holes at all. I just needed longer bolts. Old wiring layout for reference.
0 2016/10/12 17:55:28
20161006 r r swap 02a - Pic for size difference. I'm holding the old one over the new mounted one.
20161006 r r swap 02a - Pic for size difference. I'm holding the old one over the new mounted one.
0 2016/10/12 17:55:28
as a whole. undertail section.
as a whole. undertail section.
0 2016/10/11 07:41:35
this space will be empty aside from battery and eletrical.
this space will be empty aside from battery and eletrical.
0 2016/10/11 07:41:35
frame bend
frame bend
0 2016/10/11 07:41:35
Parts, parts everywhere!
Parts, parts everywhere!
0 2016/09/29 08:12:26
image
image
0 2016/09/26 18:45:07
image
image
1 2016/09/23 14:08:47
Too much?
Too much?
0 2016/09/20 17:50:26
No more fighting black spaghetti during jetting or valve adjustments! I got all my quick disconnects affixed both fuel lines, tank vent, tank drain and vacuum for the petcock!
No more fighting black spaghetti during jetting or valve adjustments! I got all my quick disconnects affixed both fuel lines, tank vent, tank drain and vacuum for the petcock!
0 2016/09/18 10:06:47
Oil cooler back on looking better than it did!
Oil cooler back on looking better than it did!
0 2016/09/14 17:42:53
Finally the carbs are back on!
Finally the carbs are back on!
0 2016/09/13 12:34:23
TBR header all bolted up! Thanks to Captain Chaos!
TBR header all bolted up! Thanks to Captain Chaos!
0 2016/09/07 10:57:56
Rear cowl fitted
Rear cowl fitted
5 2016/09/07 10:57:56
Advertisement