Wiper blades.
Thread Starter
Post Whore Junior
MotoGP
Joined: Nov 2006
Posts: 4,825
From: Triad, NC
Wiper blades.
I've done a search and cannot find any information.
I need to know the stock # for wiper blades for the "hawk. I havent done any modifications, so they should be stock. Any info, would be greatly appreciated.
Also, I am having trouble with my mirror heaters. They seem to not heating up to the proper temps, causing ice to form at cruising speed... could that be my R/R going. not giving the correct voltage?
Last thing, I broke my cup holder.. I remember a thread about a replacement carbon fiber cup holder, anyone know a local shop that carries them or can order them?
I need to know the stock # for wiper blades for the "hawk. I havent done any modifications, so they should be stock. Any info, would be greatly appreciated.
Also, I am having trouble with my mirror heaters. They seem to not heating up to the proper temps, causing ice to form at cruising speed... could that be my R/R going. not giving the correct voltage?
Last thing, I broke my cup holder.. I remember a thread about a replacement carbon fiber cup holder, anyone know a local shop that carries them or can order them?
Senior Member
SuperBike
SuperBike
Joined: Jun 2007
Posts: 1,031
From: Los Angeles ish
Sorry, can’t help with the stock #. I’ve been using a wiper blade sharpener, so I don’t have to look for new sets. Go here only $24.99 (plus shipping and handling). Also check out the cross-drilled brake lines in the performance section, a must have.
Thread Starter
Post Whore Junior
MotoGP
Joined: Nov 2006
Posts: 4,825
From: Triad, NC
Blades cannot be sharpened, I am down to the wear-bar...
OMG!.. they have a Roundtuit... and a passenger noise suppressor...
And next time I go tto the track http://kalecoauto.com/index.php?main...products_id=45
Great link, thanks...
OMG!.. they have a Roundtuit... and a passenger noise suppressor...
And next time I go tto the track http://kalecoauto.com/index.php?main...products_id=45
Great link, thanks...
Moderate-whore
MotoGP
Joined: Nov 2005
Posts: 9,052
From: Leander TX!!
TBR's are coming off this weekend...Might be for sale soon
I am replacing with this http://kalecoauto.com/index.php?main...&products_id=2
thanks a million, this is the best, most imformative site on earth...
Flux Capacitor! Blah...Everybody knows you need to generate 1.21 gigawatts of electricity to operate those things, if ya ask me, it's a waste of time and money to install...but hey, do what ya gotta man...
I am replacing with this http://kalecoauto.com/index.php?main...&products_id=2
thanks a million, this is the best, most imformative site on earth...
Flux Capacitor! Blah...Everybody knows you need to generate 1.21 gigawatts of electricity to operate those things, if ya ask me, it's a waste of time and money to install...but hey, do what ya gotta man...
Long Member
Back Marker
Joined: Mar 2007
Posts: 126
From: Northwood, NH
I heard they're going to carry the Mr. Fusion soon, finally solving the ever present 1.21 gigawatt problem. Whole package should easily get you to 2029 so you can help end the machine wars and stop the Terminator.
Moderate-whore
MotoGP
Joined: Nov 2005
Posts: 9,052
From: Leander TX!!
I do what I can...
Oh, I guess this is just as good as any thread to post this in...LOL
Who said this?
(1) "We're going to take things away from you on behalf of the common good."
(2) "It's time for a new beginning, for an end to government of the few,
by the few, and for the few, and to replace it with shared responsibility
for shared prosperity."
(3) "(We) can't just let business as usual go on, and that means something
has to be taken away from some people."
(4) "We have to build a political consensus, and that requires people to
give up a little bit of their own turf in order to create this common ground."
(5) "I certainly think the free-market has failed."
(6) "I think it's time to send a clear message , to what has become the most
profitable sector in (the) entire economy , that they are being watched."
Now you might think these were the famous words of the Father of communism,
Karl Marx. And you would be on the right track in thinking so.
But you would be wrong.
These pearls of socialist/Marxist wisdom are from none other than our very own, home-grown Marxist. . . .
Hillary Clinton!
Each of these were published (in various news papers)
on the following dates.
(1) 6/29/04
(2) 5/29/07
(3) 6/4/07
(4) 6/4/07
(5) 6/4/07
(6) 9/2/05
Be afraid, Be very afraid!
Oh, I guess this is just as good as any thread to post this in...LOL
Who said this?
(1) "We're going to take things away from you on behalf of the common good."
(2) "It's time for a new beginning, for an end to government of the few,
by the few, and for the few, and to replace it with shared responsibility
for shared prosperity."
(3) "(We) can't just let business as usual go on, and that means something
has to be taken away from some people."
(4) "We have to build a political consensus, and that requires people to
give up a little bit of their own turf in order to create this common ground."
(5) "I certainly think the free-market has failed."
(6) "I think it's time to send a clear message , to what has become the most
profitable sector in (the) entire economy , that they are being watched."
Now you might think these were the famous words of the Father of communism,
Karl Marx. And you would be on the right track in thinking so.
But you would be wrong.
These pearls of socialist/Marxist wisdom are from none other than our very own, home-grown Marxist. . . .
Hillary Clinton!
Each of these were published (in various news papers)
on the following dates.
(1) 6/29/04
(2) 5/29/07
(3) 6/4/07
(4) 6/4/07
(5) 6/4/07
(6) 9/2/05
Be afraid, Be very afraid!
Senior Member
SuperBike
Joined: Sep 2005
Posts: 1,572
From: Buffalo, NY
Yeah and lucky me she's the jr Senator for my state - NY... it was bad enough before her and "I can't keep my pants on" Bill moved here after leaving the White House... Evidently Arkansas didn't want them back...
And give me some time, i'm sure I can generate 1.21 gigawatts... Just have to look up some of Nikola Tesla's notes...
And give me some time, i'm sure I can generate 1.21 gigawatts... Just have to look up some of Nikola Tesla's notes...
I do what I can...
Oh, I guess this is just as good as any thread to post this in...LOL
Who said this?
(1) "We're going to take things away from you on behalf of the common good."
(2) "It's time for a new beginning, for an end to government of the few,
by the few, and for the few, and to replace it with shared responsibility
for shared prosperity."
(3) "(We) can't just let business as usual go on, and that means something
has to be taken away from some people."
(4) "We have to build a political consensus, and that requires people to
give up a little bit of their own turf in order to create this common ground."
(5) "I certainly think the free-market has failed."
(6) "I think it's time to send a clear message , to what has become the most
profitable sector in (the) entire economy , that they are being watched."
Now you might think these were the famous words of the Father of communism,
Karl Marx. And you would be on the right track in thinking so.
But you would be wrong.
These pearls of socialist/Marxist wisdom are from none other than our very own, home-grown Marxist. . . .
Hillary Clinton!
Each of these were published (in various news papers)
on the following dates.
(1) 6/29/04
(2) 5/29/07
(3) 6/4/07
(4) 6/4/07
(5) 6/4/07
(6) 9/2/05
Be afraid, Be very afraid!
Oh, I guess this is just as good as any thread to post this in...LOL
Who said this?
(1) "We're going to take things away from you on behalf of the common good."
(2) "It's time for a new beginning, for an end to government of the few,
by the few, and for the few, and to replace it with shared responsibility
for shared prosperity."
(3) "(We) can't just let business as usual go on, and that means something
has to be taken away from some people."
(4) "We have to build a political consensus, and that requires people to
give up a little bit of their own turf in order to create this common ground."
(5) "I certainly think the free-market has failed."
(6) "I think it's time to send a clear message , to what has become the most
profitable sector in (the) entire economy , that they are being watched."
Now you might think these were the famous words of the Father of communism,
Karl Marx. And you would be on the right track in thinking so.
But you would be wrong.
These pearls of socialist/Marxist wisdom are from none other than our very own, home-grown Marxist. . . .
Hillary Clinton!
Each of these were published (in various news papers)
on the following dates.
(1) 6/29/04
(2) 5/29/07
(3) 6/4/07
(4) 6/4/07
(5) 6/4/07
(6) 9/2/05
Be afraid, Be very afraid!
Last edited by RickB; Oct 5, 2007 at 10:26 AM.
Senior Member
SuperBike
SuperBike
Joined: Jun 2007
Posts: 1,031
From: Los Angeles ish
Hey Kickin,
I left my can’s on and installed the O pipe downstream of ‘em. Definitely helps with the lack of back pressure I was dealing with. The added bonus was it makes a nice rack for my chili pot, keeps it hot too. I’ll mix up a batch for Sunday football and it keeps simmering all the way there.
I left my can’s on and installed the O pipe downstream of ‘em. Definitely helps with the lack of back pressure I was dealing with. The added bonus was it makes a nice rack for my chili pot, keeps it hot too. I’ll mix up a batch for Sunday football and it keeps simmering all the way there.
Senior Member
Back Marker
Back Marker
Joined: Sep 2007
Posts: 103
From: Thousand Oaks, CA
Awsome, I just ordered thishttp://kalecoauto.com/index.php?main...=blinker+fluid
I have been looking for this forever.
I have been looking for this forever.
Senior Member
Back Marker
Joined: Mar 2006
Posts: 139
From: Northern Vermont
Awsome, I just ordered thishttp://kalecoauto.com/index.php?main...=blinker+fluid
I have been looking for this forever.
I have been looking for this forever.
Moderate-whore
MotoGP
Joined: Nov 2005
Posts: 9,052
From: Leander TX!!
Senior Member
Back Marker
Back Marker
Joined: Sep 2007
Posts: 103
From: Thousand Oaks, CA
But they still have these.http://kalecoauto.com/index.php?main...uffler+bearing
