REDVTR1000

Ok before we get started i know this is not a superhawk question. Mods feel free to move this post at will (i didn't know where to put it). With superhawks comes a couple carb experts and my problem is this: I have a 125cc GY6 scooter that i am installing a new carb on and it has way more ports than the old one. two on top two on the side and one bigger one below that. there is also a drain at the bottom that has a line running from it allready. question is what is what? i do not really know what corrisponds to the old one and this thing came with NO documentation. i have pics


this is the side of the carb. you can see the two prong input as well as the larget diameter port below it

pic2

this is from the other side. you can see the two prong input on top (one prong has a line on it)

any help? i know some of you are guru's with this stuff. i have no problems with the hawk maintenence, who would have though scooters would be so difficult?

Little_Horse

the big port is probably for your fuel line, in the second pic the part that has the line on it already looks to be a diaphram on off valve, but you would have to check. Could the extra ports just be there for a different model and just need to be blocked off?

j shizzy wizzy

I think you should look for a specific forum for that model. just google away. you'll find your answer! try the battlescooter forums to start.

Circuit_Burner

When in doubt, always block open passages.
Work out from there.