bafflectomy help!
I drilled 4 holles in each baffle wall and now the sound is great! The problem is...my bike runs hotter?WTF?
|
Are the holes going thru the outside of the can? lol
|
I find it hard to believe that an increase in heat is related to free-er flowing exhaust.
|
Originally Posted by Syclone
(Post 220838)
I find it hard to believe that an increase in heat is related to free-er flowing exhaust.
|
the holes are are inside of the cans...
|
That means if you richened the jetting to whatever it wants, you gain Horsepower.
Not so bad. |
could be this a problem...the heat?should I rejjet the carbs to get rid of this>???
|
This bike doesn't necessarily need a re-jet for exhaust, and unless you pulled all of the guts out of the stock pipes, I really doubt you leaned up the engine enough to cause a temperature spike.
|
Who knows if the jetting was even in the ball-park to begin with ?
Bring a bike from colorado to texas and it will run lean as hell. when an engine is too lean, adding fuel( richening ) will bring up the horse power and lower the combustion temp. Add an aftermarket exhaust and this same thing is what will happen. |
Not to sound obvious, but it's summer. The farther you get into June the hotter the bike will run - yes, even in Romania. You're about the same latitude as US and in the northern hemisphere.
|
thanks
|
All times are GMT -7. The time now is 02:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands