SuperHawk Forum

SuperHawk Forum (https://www.superhawkforum.com/forums/)
-   Modifications - Performance (https://www.superhawkforum.com/forums/modifications-performance-29/)
-   -   Will a 900rr Oil Cooler work on SH? (https://www.superhawkforum.com/forums/modifications-performance-29/will-900rr-oil-cooler-work-sh-17944/)

FL02SupaHawk996 03-19-2009 08:18 AM

Will a 900rr Oil Cooler work on SH?
 
Has anyone tried to fit a filter type oil cooler from a 900rr to a SH?

http://fiche.ronayers.com/Index.cfm/...PAN_-_OIL_PUMP

I'm be interested in running one like this along with the OEM SH oil cooler for more cooling, simultaneously...

Thanks,
RC

mikstr 03-19-2009 10:23 AM

Interesting idea.... although I have no idea as to whether it would work or not....

FL02SupaHawk996 03-19-2009 10:25 AM

seems like it would be one of the easiest mods for extra cooling:)

RCVTR 03-19-2009 06:39 PM

Look at an SP-1 cooler. It mounts across the front, like the SuperHawk cooler.

The SP-2 cooler mounts in a near-vertical orientation, on the left side.

Prolly not a straight-forwad bolt-on.

Mine worked with a std cooling setup...
Not that a bigger cooler wouldn't be better, though.

Thorsten made air scoops for SH radiators. You could probably order some - he must have the molds for them. Send a message to Durbahn-USA.com and see.

Just ordered some Carillo rods. They're now a special order part, but cost about the same as always. 4-6 week delivery time. Maybe you can get a set for a VTR(?).

I ordered mine through Dynoman Performance (dotcom). They sell them for quite a bit less than Carillo direct.

FL02SupaHawk996 03-20-2009 06:44 AM

I like the RC51 SP1 oil cooler, but one of the ports is 45 degrees and to bolt right up to the SH it needs to be 90...any suggestions to make it work anyway w/o cutting the port off and reattach it at 90?

Also, I've looked into custom lightweight rods along with a lightened crank, but not looking to spend another $2K...yet;)

I'll try to track down the scoops...Thanks RCVTR!

FL02SupaHawk996 03-20-2009 07:19 AM

http://shop.durbahn.de/shop/en/bikes...awk?bikecat=57

Here's a link for air scoops!

RCVTR 03-20-2009 07:34 AM

Cool. They just added those to the USA site. I had seem them on his German site.

I bought the glass scoops. They are ultra light.

Rods were $650. Crank lightening is around $250. I have a spare crank that I'm going to send out at some point. I decided to put the rods on my shefl and get that part over with.

FL02SupaHawk996 03-20-2009 07:49 AM


Originally Posted by RCVTR (Post 206292)
Cool. They just added those to the USA site. I had seem them on his German site.

I bought the glass scoops. They are ultra light.

Rods were $650. Crank lightening is around $250. I have a spare crank that I'm going to send out at some point. I decided to put the rods on my shefl and get that part over with.

Ordered the glass/carbon scoops for the bling:cool:

Stop it with the rods already! I'll just wait cuz my plan is to buy your race bike off ya when your done with it;)

RCVTR 03-20-2009 08:23 AM

Not for sale.
Not gonna be for sale, so you can just forget about it.

FL02SupaHawk996 03-20-2009 08:27 AM


Originally Posted by RCVTR (Post 206307)
Not for sale.
Not gonna be for sale, so you can just forget about it.

I understand, but deep in the back of your mind just remember that if you ever do sell her to me and kick yourself for doing it then I'd sell her back after a few races;)


All times are GMT -7. The time now is 11:14 AM.


© 2024 MH Sub I, LLC dba Internet Brands