Exhaust question
 

Here's the deal... I bought a set of 2Bros cans off ebay and hey came with the low mount midpipe. I currently have Micron High mounts installed.

Well, my non-thinking self realized that my high mount brackets won't work with the low mount 2bros... and I don't have the footpegs anymore.

So here's what I'm thinking... just replace the CANS only and use the Micron mid-pipes. I figure as long as everything fits together, there shouldn't be a problem.

Anyone have any thoughts that this definitely won't work? I don't want to even begin to attempt it if there's no chance it'll work... I'll just wait and get some rear pegs off ebay :cry:

If it all fits, you're fine.

My only thought is that the standard mount cans might be longer then the high mount cans. I know my Erion Racing cans are long! If thats the case you simly drill out the rivets at one end of the can, take the end cap off, then decide how long you want the new cans to be. Measure the can, then cut thru the outer canister and the inner core, fiberglass and all. When your done, slip the end back in and re-rivet and your done. Pretty easy to do, just messy cause of the fiberglass packing.

I may even have the stock rear pegs if your interested.

I may take up up on that. How much $$ we talkin?
I plan on doing the job this weekend... I'll update as soon as I know if it worked or not.

Stay tuned

PM me and we can discuss it.

Re: Exhaust question
 

Hey if you switch to low mounts wanna sell the high mount link pipes? :P

Re: Exhaust question
 

Oh, I had Micron highmounts when they were first made (my bike was the development bike) and I found that modified Fireblade footrests fitted nice with the cans.

Hope this helps

Daz