Newbie's New Tail
Thread Starter
Junior Member
Squid
Joined: Jan 2010
Posts: 9
From: 2 hrs Sth of Sydney
Newbie's New Tail
Hi to all on the forum.
Just joined after 5 years of ownership.
Have been a member of the AU forum for some time now and have a build thread there that might be of interest to you.
Mostly cosmetic changes . . . .
Should be finished in the next week or so depending on whether something major goes wrong.
Here's the link;
http://ozfirestorm.proboards.com/ind...y&thread=11029
Just joined after 5 years of ownership.
Have been a member of the AU forum for some time now and have a build thread there that might be of interest to you.
Mostly cosmetic changes . . . .
Should be finished in the next week or so depending on whether something major goes wrong.
Here's the link;
http://ozfirestorm.proboards.com/ind...y&thread=11029
Senior Member
Superstock
Joined: May 2008
Posts: 347
From: S.Dak USA
Very nicely done Cheeky.Some talented lads down there in Oz.Theres a bloke from the UK who did an R1 rear end swap with what I presume will be a similar exhaust setup to what you are planning.Take a look,see what you think..
https://www.superhawkforum.com/forum...ad.php?t=16455
https://www.superhawkforum.com/forum...ad.php?t=16455
Thread Starter
Junior Member
Squid
Joined: Jan 2010
Posts: 9
From: 2 hrs Sth of Sydney
Thanks for the feedback guys . . . . is raining today, so I loose a day for paint :-(
But will get the surface as close to perfect as I can in readiness for nice weather.
Also my Card Reader is busted so I cannot upload any of my new images.
Will post a note when I have that sorted out.
But will get the surface as close to perfect as I can in readiness for nice weather.
Also my Card Reader is busted so I cannot upload any of my new images.
Will post a note when I have that sorted out.
Thread Starter
Junior Member
Squid
Joined: Jan 2010
Posts: 9
From: 2 hrs Sth of Sydney
Senior Member
MotoGP
Joined: Mar 2007
Posts: 3,132
From: Phoenix, AZ
final result looks good. It seems like you might risk a burn if you aren't careful with how you sit.. But that could just be the perspective.
Now what will you do to make the front end look unique?
Now what will you do to make the front end look unique?
Thread Starter
Junior Member
Squid
Joined: Jan 2010
Posts: 9
From: 2 hrs Sth of Sydney
Otherwise no worries - was riding yesterday in 37 degrees C (99 F) with no real issues.
The front end has had me stumped for a bit, but I have some ideas forming at the moment . . . .
Thread Starter
Junior Member
Squid
Joined: Jan 2010
Posts: 9
From: 2 hrs Sth of Sydney
Escape Reality
SuperSport
Joined: Jun 2006
Posts: 612
From: KANATA, KANADA
I love it...might have to redo mine now
Thread Starter
Junior Member
Squid
Joined: Jan 2010
Posts: 9
From: 2 hrs Sth of Sydney
Just a quick update . . . . have put custom decals on the exhaust cans.
Take a look at the last page of the build thread.
The guy who printed them is still surprised they haven't burned to a crisp, but so far they are going great and I have a few spares.
Take a look at the last page of the build thread.
The guy who printed them is still surprised they haven't burned to a crisp, but so far they are going great and I have a few spares.
Thread
Thread Starter
Forum
Replies
Last Post
