Looking for a lower fairing/belly pan
05-04-2011, 05:50 PM
#1
Junior Member
Squid
Thread Starter
Join Date: May 2011
Posts: 1
Looking for a lower fairing/belly pan
Hi guys,
New member, just picked up a 2000 VTR1000F and I'd like to get a belly pan/lower fairing, but something a bit longer and coming up to the front fairing. I found a few pics of VTR's with lower fairings like that, but couldn't attach any here. The stock belly pan and all the aftermarket ones I could find are pretty small and unimpressive.
I'd also like to get :
1. Either an integrated taillight/ts, something like the Volar, or small LED rear TS
2. Flush mount front TS or mirror/ts combo.
3. Smaller license plate bracket with the mud guard
4. Rear hugger
Wiring and mechanical work are not a problem, but I'm not a body guy/painter so body parts prefabbed for the VTR would be great.
Any suggestions or advice on a good place to find these, or good names to look for would be appreciated.
Cheers,
New member, just picked up a 2000 VTR1000F and I'd like to get a belly pan/lower fairing, but something a bit longer and coming up to the front fairing. I found a few pics of VTR's with lower fairings like that, but couldn't attach any here. The stock belly pan and all the aftermarket ones I could find are pretty small and unimpressive.
I'd also like to get :
1. Either an integrated taillight/ts, something like the Volar, or small LED rear TS
2. Flush mount front TS or mirror/ts combo.
3. Smaller license plate bracket with the mud guard
4. Rear hugger
Wiring and mechanical work are not a problem, but I'm not a body guy/painter so body parts prefabbed for the VTR would be great.
Any suggestions or advice on a good place to find these, or good names to look for would be appreciated.
Cheers,
Last edited by UltraJibus; 05-04-2011 at 06:02 PM.
05-26-2011, 07:40 AM
#4
Member
Squid
Join Date: Mar 2011
Location: currently stationed in La. but from the HOuston, Tx area and im home every weekend
Posts: 36
Sharkskinz has a full lower fairing. The one i my bike looks like it but it is a non sharkskinz 2 piece, dont get that one. I ordered the sharskinz and it is a 1 piece but looks the same!
06-23-2011, 09:38 AM
#5
Unicycle
Squid
Join Date: Jun 2011
Location: Jacksonville, Florida
Posts: 1
Sharkskinz is the way to go. I have had mine on my bike for about 8 years and it has held up well. I have seen others but I like the way mine looks with the bike. Plainted to match and Honda Decals! You can check out my pictures for yourself. R
06-29-2011, 05:48 PM
#6
Mid-level Member
Superstock
Join Date: Dec 2004
Location: Chicago
Posts: 268
--fred
Thread
Thread Starter
Forum
Replies
Last Post
