VTR Of The Month - October 2009 - Winner: inderocker!
Congratulations to inderocker for winning the October VTROTM!
https://www.superhawkforum.com/forum...08&postcount=4 https://www.superhawkforum.com/forum...&pictureid=502 -------------------------------------------------------- A BIG thanks to everybody who participated in September's VTROTM! :D If you did not win, be sure to get your nomination in again this month for your chance at SHF fame and glory! :evillaugh: -------------------------------------------------------- VTROTM Rules:
JamieDaugherty - https://www.superhawkforum.com/forum...01&postcount=1 inderocker - https://www.superhawkforum.com/forum...08&postcount=4 RickB - https://www.superhawkforum.com/forum...55&postcount=5 |
VTR Of The Month - August 2009 - Nominate Now!
2 Attachment(s)
Is it too late to throw my name into the hat? I've been wanting to enter one of these but I've been too busy (read: lazy) to get it in on time.
- 1998 Model - Jardine slip-ons, special order race baffle (not standard out of catalog) LOUD! - Ported heads - +0.5mm oversize pistons - K&N air filter - Front forks off a 2001 GSXR750, CBR954 triple clamps, stock VTR wheel with oversize EBC Pro-Lite rotors, front lowered 20mm - Revalved WP rear shock, rear raised 50mm - Custom machined shift lever - A buch of other stuff that I can't think of right now http://www.daughertymotorsports.com/temp/DSC01127_1.JPG https://www.superhawkforum.com/forum...5&d=1253136980 https://www.superhawkforum.com/forum...6&d=1253137008 |
:bump:
|
Wow, no other takers this month... Guess I'll have to give it a go.
Mods so far... -Ported & Polished Heads -Yoshimura Titanium Slip On's -Factory Pro Ignition Advancer -Factory Pro "Ti" Jet Kit -Factory Pro Evo Shift Star Kit -K&N Air Filter -TBR Pair Block Off Plates -A.P.E. Manual Cam Chain Tensioner's -F4i Front Brake Master Cylinder -F4i Front Calipers -Race Tech Rebound & Gold Valves -Gold Anodized Fork Caps -Pro Bolt Preload Adjusters -Ohlins Rear Shock -Bridgestone BT021's -D.I.D. X-Ring Gold 530ZVM2 Chain -Sunstar Sprockets 16/41 -Galfer Steel Braided Brake Lines -Goodridge Steel Braided Clutch Line -Throttlemiester Bar Ends -Handlebar Mounted Choke -Helibars -Zero Gravity Double Bubble Windscreen -Sargent Seat -Renthal Grips -Trimmed Rear Fender -Clear L.E.D. Rear Combination Light -Clear Flush Mount L.E.D. Turn Signals -YZFR6 Regulator Rectifier -6 Spoke Enkei Wheels -All Balls Front & Rear Wheel Bearings -All Balls Heavy-Duty Tapered Steering Head Bearings -Scorpio SR-i600 Alarm https://www.superhawkforum.com/forum...pictureid=1076 https://www.superhawkforum.com/forum...&pictureid=504 https://www.superhawkforum.com/forum...&pictureid=502 |
1 Attachment(s)
Well, I had wanted to get some new pics showing a few mods and the fall colors but the weather has not been cooperative lately... This is from fall '05
Corbin seat Helibars Truckinduc's CCTs smoke double bubble windscreen Factorypro detent arm CF accents K&N filter shimmed carb needles ceramic coated head pipes braided stainless brake lines Attachment 28487 |
For some reason the poll isn't comng up on the front page... odd.
|
Had to vote for Inderocker
These just something about a clean black Hawk :cool: |
Originally Posted by Mike996
(Post 240094)
Had to vote for Inderocker
These just something about a clean black Hawk :cool: |
Originally Posted by hawxter996
(Post 240096)
mmmmmmmmmmmmmmmmm. its not black.
Now that you mention it... it looks different in every pic. Damn me. What is the official color on it? |
Dark Chocolate??:D
|
Originally Posted by Mike996
(Post 240105)
Now that you mention it... it looks different in every pic. Damn me. What is the official color on it?
its some sort of metallic grey |
Originally Posted by JamieDaugherty
(Post 235301)
Is it too late to throw my name into the hat? I've been wanting to enter one of these but I've been too busy (read: lazy) to get it in on time.
- 1998 Model - Jardine slip-ons, special order race baffle (not standard out of catalog) LOUD! - Ported heads - +0.5mm oversize pistons - K&N air filter - Front forks off a 2001 GSXR750, CBR954 triple clamps, stock VTR wheel with oversize EBC Pro-Lite rotors, front lowered 20mm - Revalved WP rear shock, rear raised 50mm - Custom machined shift lever - A buch of other stuff that I can't think of right now http://www.daughertymotorsports.com/temp/DSC01127_1.JPG https://www.superhawkforum.com/forum...5&d=1253136980 https://www.superhawkforum.com/forum...6&d=1253137008 I voted for yours, although inderocker's is certainly nice. |
Originally Posted by killer5280
(Post 240112)
Yours is modded similar to mine. Did you really raise the rear 50 mm? What does that translate to at the shock mount?
I voted for yours, although inderocker's is certainly nice. Mine's closer to +70mm in the rear. I set it by ride height and not shock length, so I can't tell you about that. Only three votes and one of them was me...... sniff sniff................. |
Originally Posted by JamieDaugherty
(Post 240122)
Mine's closer to +70mm in the rear. I set it by ride height and not shock length, so I can't tell you about that.
Only three votes and one of them was me...... sniff sniff................. Now that he has a shop, you should see if he will sell daughertymotorsports parts in it. lol |
I have to vote for inderocker, since I own an '05 Titanium as well. And his is as clean a Hawk as I've seen. Especially the postcard shot with the Canadian Rockies in the background.
But Jamie's front end sure looks nice. |
Originally Posted by JamieDaugherty
(Post 240122)
Mine's closer to +70mm in the rear. I set it by ride height and not shock length, so I can't tell you about that.
Only three votes and one of them was me...... sniff sniff................. |
they are all nice looking bikes,may the best man/machine win
|
Originally Posted by lazn
(Post 240127)
You'd have gotten my vote but for Indie's beauty... He sure knows how to make it purdy.
Now that he has a shop, you should see if he will sell daughertymotorsports parts in it. lol Yeah, my bike looks a lot better in person. I wish that I had better pictures of it. Maybe I should take some!
Originally Posted by killer5280
(Post 240134)
That just seems like an awful lot. Mine shock is shimmed from 4-6 mm at the mount, but I don't know what that translates to in ride height increase. At 6mm shimmed with the shorter than stock 954 fork (set flush with the top of the triples) it turns quicker than I like.
|
Yeah, you need to find a better backdrop for your photos.
Your black lab looks happy though. |
Inderocker :thumbsup:
|
Originally Posted by VTRsurfer
(Post 240202)
Yeah, you need to find a better backdrop for your photos.
Your black lab looks happy though. I guess that I never really thought much about taking pictures of my bike. Plus, we don't have a lot of impressive scenery around here.... unless a 1000 acre soybean field is impressive to you. |
Actually, a full size photo of your avatar would work.
|
Originally Posted by VTRsurfer
(Post 240405)
Actually, a full size photo of your avatar would work.
Indeed! :wheelie: |
Originally Posted by VTRsurfer
(Post 240405)
Actually, a full size photo of your avatar would work.
Originally Posted by inderocker
(Post 240407)
Indeed!
I would, except that's a CBR600!!! That picture is back from my racing days. |
I really like the titanium color, and this guy, VTS, made it pop I think with the overall understated stealth color scheme.
Everyone's bike, modded to their liking, is what makes the hawk IMHO. https://www.superhawkforum.com/forum...7&d=1255213046 |
VTS should enter his bike in the Nov VTROTM. I would definitely vote for it.
|
Well RickB, I think we got what is called "a beating".
I think what I'll do next time (if there is a next time) is to wash my bike and find somewhere more attractive than my shop to take the pictures. I suppose by next summer it will need washed anyway. I should probably do that at least once a year. |
:kneel:JD!
Formula for success next year, VTR of the year 2010!!! The one thing I would change. Tint screen, trim rear fender, aftermarket blinkers, ASV levers, rear solo cowl, wrap the headers, repaint/powdercoat rt engine cover, and make that billet brake pedal you mentioned, and wash the bike like you were saying. Oh yeah, keep the soybean field, and Lab. Add bikini girl. You will not lose. I'm rootin for you. Best regards, with utmost respect. VTS |
Originally Posted by Hawkrider
(Post 241146)
VTS should enter his bike in the Nov VTROTM. I would definitely vote for it.
Thanks alot for kudos and support. If I can get it back together and take pics in the next week or so I'll enter, how's that for motivation. The pics will probably be in the rain. November + Washington = Suckage. Thanks again.:D |
Congrats inderocker, nice machine. Could ya throw up the color code for the Ti., I think I'm going for a paint job over the winter lol.
|
All times are GMT -7. The time now is 06:07 PM. |
© 2024 MH Sub I, LLC dba Internet Brands