Hello fellow SH owner!

Bearshawk,

We can definitely get your forks working well for you. Yes, .95 springs is what I recommend.

My primary job is the Navy. I work at a nuclear power training site and we have a huge maintenance shutdown coming up between 3/12 and 4/2. That would not be a good time for me. Any time before or after that is fine though.

Cost is $350. You cover shipping (to 12074) both ways. This includes labor, shims, oil, and springs. If you need bushings or seals that is extra, and either you can buy them and send them with the forks or I can order them and it is added to the total cost. I modify the stock Showa valves but use my own shim stacks. Both rebound and compression are revalved. I also polish the fork tubes and faces of the valves. If you do a lot of track days I can modify the forks for another $20 to give you another 1/2" or so of fork travel.

Give me a call at 518-883-7058 and we can talk. I'll have lots of questions for you regarding setup.

Talk to you soon!

Greg