What other levers fit the superhawk
Thread Starter
Senior Member
Back Marker
Joined: Jul 2009
Posts: 162
From: N. Ireland
What other levers fit the superhawk
Hey
Trying to get a set of those pazza replicas off ebay for my vtr but the only ones listed are for a sp1. So want to know what other bikes levers are the same as the VTR so i can see if there are sets listed for those bikes.
Thanks!
Trying to get a set of those pazza replicas off ebay for my vtr but the only ones listed are for a sp1. So want to know what other bikes levers are the same as the VTR so i can see if there are sets listed for those bikes.
Thanks!
Senior Member
SuperSport
Joined: Feb 2010
Posts: 667
From: NY State
Look up the Honda part number for the lever(s) and type it into the link below for a reverse look-up:
http://fiche.ronayers.com/Index.cfm/Module/WhereUsed
I like to get Honda part numbers from servicehonda.com, they use real fiche and genuine part numbers.
I can personally attest to the fact that an F4i brake lever will fit perfectly into the VTR perch.
http://fiche.ronayers.com/Index.cfm/Module/WhereUsed
I like to get Honda part numbers from servicehonda.com, they use real fiche and genuine part numbers.
I can personally attest to the fact that an F4i brake lever will fit perfectly into the VTR perch.
Thread Starter
Senior Member
Back Marker
Joined: Jul 2009
Posts: 162
From: N. Ireland
they are on ebay uk. they are from hong kong and cost about £30, dunno wat that is in dollars. They are very good quality pretty much everyone off the ni biker forum im on has them now and theyre great.
with an update to above, the bikes i posted above are bikes where BOTH levers match.
the brake lever from a hornet, cbr 600, cb919, cbr900rr, and vtx1300 will also match
the clutch lever from a cbr1100xx blackbird, st1300/st1300a, vfr800 98-01, will fit
the pazza rep brake lever is available, however there seems to be no clutch lever available which is a bummer.
with an update to above, the bikes i posted above are bikes where BOTH levers match.
the brake lever from a hornet, cbr 600, cb919, cbr900rr, and vtx1300 will also match
the clutch lever from a cbr1100xx blackbird, st1300/st1300a, vfr800 98-01, will fit
the pazza rep brake lever is available, however there seems to be no clutch lever available which is a bummer.
Pew Pew...lasers
Superstock
Joined: Jun 2007
Posts: 311
From: Alexandria, Va.
i bought one to check it out since it fits both my vfr and vtr. quality is pretty good, but i have not mounted it yet to check fitment. Sorry about the crappy cell phone pics.
http://cgi.ebay.com/ebaymotors/Racin...Q5fAccessories
Pew Pew...lasers
Superstock
Joined: Jun 2007
Posts: 311
From: Alexandria, Va.
Pew Pew...lasers
Superstock
Joined: Jun 2007
Posts: 311
From: Alexandria, Va.
Yeah...I guess we do.
Well here is a picture of it installed on my VFR, and a couple of pictures of the bike and all of its awesomeness. My VTR is at a buddies getting worked on. Fits great on the VFR so it should fit just as well on the VTR since they use the same configuration.
Well here is a picture of it installed on my VFR, and a couple of pictures of the bike and all of its awesomeness. My VTR is at a buddies getting worked on. Fits great on the VFR so it should fit just as well on the VTR since they use the same configuration.
RUNLEVELZERO #99
SuperBike
Joined: Jan 2007
Posts: 2,219
From: Skokie
Those don't hold a candle to ASV's, which are "unbreakable" (fold) and have sealed bearings besides better quick reach adjustment.
http://asvinventions.com/Unbreakable-Levers/
They're all too rich for my blood!
http://asvinventions.com/Unbreakable-Levers/
They're all too rich for my blood!
right now the seller only has the brake levers. i've been emailing him every couple of weeks about the clutch, and he keeps pushing back the time when they are supposed to arrive. he said they will be getting some, i just don't know when.
i bought one to check it out since it fits both my vfr and vtr. quality is pretty good, but i have not mounted it yet to check fitment. Sorry about the crappy cell phone pics.
http://cgi.ebay.com/ebaymotors/Racin...Q5fAccessories
i bought one to check it out since it fits both my vfr and vtr. quality is pretty good, but i have not mounted it yet to check fitment. Sorry about the crappy cell phone pics.
http://cgi.ebay.com/ebaymotors/Racin...Q5fAccessories
Pew Pew...lasers
Superstock
Joined: Jun 2007
Posts: 311
From: Alexandria, Va.
I work for the federal government.
Senior Member
Back Marker
Joined: Apr 2010
Posts: 115
From: Upstate NY
Oh hawt damn, even better. Those are my favorites, very rare to see indeed. Was born and still have family in Germany, the Germans dig those coupes, take all the badges off and run em like demons on the autobahn.
Whatever branch of the fed you're in, I want to join. Taking any law student interns?
Whatever branch of the fed you're in, I want to join. Taking any law student interns?
Pew Pew...lasers
Superstock
Joined: Jun 2007
Posts: 311
From: Alexandria, Va.
Oh hawt damn, even better. Those are my favorites, very rare to see indeed. Was born and still have family in Germany, the Germans dig those coupes, take all the badges off and run em like demons on the autobahn.
Whatever branch of the fed you're in, I want to join. Taking any law student interns?
Whatever branch of the fed you're in, I want to join. Taking any law student interns?
Senior Member
Back Marker
Joined: Apr 2010
Posts: 115
From: Upstate NY
Hellz yeah Plus, VA is warmer than here. Without knowing it you may have given me a career path. I was swaying towards government work with my degree but wasn't quite sure, time to do (even) more research
Plus, VA is warmer than here. Without knowing it you may have given me a career path. I was swaying towards government work with my degree but wasn't quite sure, time to do (even) more research
Pew Pew...lasers
Superstock
Joined: Jun 2007
Posts: 311
From: Alexandria, Va.
Senior Member
Back Marker
Joined: Jun 2008
Posts: 139
Nice M coupe taskmasta.
I was thinking about the brake lever, it is very good price.
Maybe you guys already know, but here is the same style clutch lever for SH on ebay. not as good price as the one from Hong Kong.
http://cgi.ebay.com/ebaymotors/Click...Q5fAccessories
I was thinking about the brake lever, it is very good price.
Maybe you guys already know, but here is the same style clutch lever for SH on ebay. not as good price as the one from Hong Kong.
http://cgi.ebay.com/ebaymotors/Click...Q5fAccessories
Last edited by mcdoggy2000; Apr 28, 2010 at 06:42 PM.
Senior Member
SuperBike
Joined: Aug 2009
Posts: 1,978
From: thorold ontario
petes superbike is selling pazzos for 180 cdn shipped till the end of the month. i almost bought a set but had to spend the money on something else instead. these ones here though ill buy for sure, i emailed the seller waiting to see when he gets some in so i can place my order 
erno
Back Marker
Joined: Apr 2009
Posts: 226
From: Australia
This guy is from Hongkong maybe one of these might fit
http://stores.shop.ebay.com.au/IDeal...0Q2em14?_pgn=2
http://stores.shop.ebay.com.au/IDeal...0Q2em14?_pgn=2
Senior Member
SuperBike
Joined: Aug 2009
Posts: 1,978
From: thorold ontario
The clutch levers listed. Are all those bikes equiprd with a hydralic clutch? I've never had my lever off but I'd imagine that the hydralic and cable clutch levers would attach differently. Of course icould be wrong I messagedthe guy last night and he replied saying he has most of the levers that were posted in this thread in stock so I'm gonna make sure that he has the gsxr brake lever I need and ill be ordering my set tonite
I messagedthe guy last night and he replied saying he has most of the levers that were posted in this thread in stock so I'm gonna make sure that he has the gsxr brake lever I need and ill be ordering my set tonite
Senior Member
Back Marker
Joined: Apr 2010
Posts: 115
From: Upstate NY
Nice M coupe taskmasta.
I was thinking about the brake lever, it is very good price.
Maybe you guys already know, but here is the same style clutch lever for SH on ebay. not as good price as the one from Hong Kong.
http://cgi.ebay.com/ebaymotors/Click...Q5fAccessories
I was thinking about the brake lever, it is very good price.
Maybe you guys already know, but here is the same style clutch lever for SH on ebay. not as good price as the one from Hong Kong.
http://cgi.ebay.com/ebaymotors/Click...Q5fAccessories
Just as much as an ASV...I'll pass on that
Senior Member
Superstock
Joined: Oct 2008
Posts: 388
From: Muskego,WI
Just go with a real set of Pazzo's. you wont be disappointed. What on the bike do you touch as much as the clutch and brake levers (aside from the throttle).
spoil yourself, you will not regret it!
spoil yourself, you will not regret it!
Thread Starter
Senior Member
Back Marker
Joined: Jul 2009
Posts: 162
From: N. Ireland
This guy is from Hongkong maybe one of these might fit
http://stores.shop.ebay.com.au/IDeal...0Q2em14?_pgn=2
http://stores.shop.ebay.com.au/IDeal...0Q2em14?_pgn=2
those levers are made in hong kong
there are several sellers on ebay.co.uk selling them but none have a V-00 fitment clutch lever for our bikes, although the F-18 brake lever is readily available.
