What have you done to your Hawk
 

i have done some work since buying it.
1. ebc rotors
2. ebc brake pads
3. Race Tech fork springs
4. Rumble imports undertail
5. Rumble imports tire hugger
6. Works rear shock
7. Jet kit
8. Jardine Black JT1 exhaust.

Plus some other stuff i will post some pics soon.

I want to go with the dual headlight and i want a steering dampner soon.

Re: What have you done to your Hawk
 

Bone Stock, Haven't even gotten rid of the ugly rear fender.

Re: What have you done to your Hawk
 

Just a few mods on mine... :)

Heli bars
Corbin seat
Factory Pro shift kit
TPS adjustment

Rick B
2002 SH

Re: What have you done to your Hawk
 

sharkskinz front fairing, dynojet jetkit, vortex racing clip-ons, doublt bubble windshield, flushmount front signals some complicated tweaks to the gauge cluster(do it yourself electric fix), and hindle highmount titanium pipes.

Front to rear:

Pirelli Diablo Corsa
EBC HH sintered brake pads
Race Tech fork springs (1.0kg/mm)
ZG DB windscreen
analog clock from an old watch on triple tree ;)
F2 Heli bars
SS brake lines
MiG slip-ons (currently stockers on, but MiGs go on for special occasions :D )
APE MCCTs
EBC HH sintered rear brake pads
PitBull spool adapters + spools
+2 rear sprocket

Streetfighter mod will be done during Christmas break. w00t

...ridden the sh%$ out of it!

marmaladeboy what type of street fighter mods you thinking of doing. I been considering it too but i am at a lose as to where to start.

Re: What have you done to your Hawk
 

here goes a pic of my hawk.
She was in the shop getting my 8500 mile service and i went 1 tooth down in the front the new front springs and rear shock i will get more pics showing all that i done.

Plus if your in the miami area check out the shop i use these guys dont bs you at all they know there stuff too.

Cycle Race Tech......

sorry i had to give them a shout out. they have saved me hundreds and tought me a thing or two.

First things first, it's all about the front/headlight. I'm still not 100% convinced of this one (not this one specifically, but it looks similar to the one I purchased:

http://www.acerbis.com/p107_headligh...0/14300184.jpg

After that:

Front-mount radiator.
Larger fuel tank.
Handlebar instead of clip-ons.

And waaaay after that...
SSS.
Single or single-side exhaust/s.

But, first I've got to get rid of my track bike and finish the project car.

Let's see if I can remember everything, I'll start from front to rear. Front wheel and rotors are RC51, axle is ZX12R, wheel bearings are 954. Brake calipers and forks are GSXR1000, triples are 929 upper and 954 lower. 929 Heli bars mounted under the upper triple with Galfer ss brakelines all around. I think that takes care of the front end, oops forgot the carbon fiber GSXR fender.

K&N air filter and factory jet kit for intake and a combination of cbr1000rr and R1 frame sliders. Harris rear sets with slash cut pegs and carbon fiber heel protectors. Flush mount flexible 12 led front signals and running lights in the fairing air scoops. Corbin seat for the tush.

Jardine high mount mid pipes connected to 2bros carbon fiber cans. 900rr rear wheel with -1 front sprocket and +2 rear vortex for track days and and 41 tooth for street, 520 chain. Rumble imports tail with carbon look led lights and hugger,(yet to install hugger though). I also have a 900rr swing arm that I'm either going to put on or cut the brace off and weld to the stock swingarm. Oh and an airblade double bubble iridium screen. And that's all I can say about that because life is like a box of chocolates. :lol:

hey marmaladeboy, let me know what you do for a front mount radiator... i'm looking to do the same to mine... just need some ideas.

Re: What have you done to your Hawk
 

So far:

Zero Gravity double bubble
SS front brake lines
Jardine high mount polished ovals
+2 rear sprocket
Avon Azaros av49/50 SP Pro

Will do. Just gotta find a way to get it around that front cylinder...

I think I've seen a front-mounted radiator on a superhawk somewhere. I'll have to see if I can dig up that picture...

Is DaZ still on the board? His Superhawk was awesome.

i don't think faz has made a post in months...

I meant Daz. The one from England.

But yeah, haven't seen Faz either.

Then again, I hadn't been back here for awhile...

hey marmalade... good taste on the acerbis light! that's the diamond headlight that i currently have on my hawk (except in flat black). i'd post pics... but no digi-cam.
other mods: -1F +2R sprocket, jardine blk hi-mounts, rattlecan black paintjob, superbike bars, fenderectomy.

...

...

... that was weird... it wouldn't let me post, some kinda error message so i tried a couple of times. i guess they all went through.

Re: What have you done to your Hawk
 

I've got a couple. :lol:

Start from the front:

Pirelli SuperCorsa
VFR750 Wheel/Rotors
Racetech Gold valves/springs
Dampner rod mod
Fork brace (just sold)
GSXR1000 6 piston calipers
SS brake lines
EBC HH++ front pads
DB smoke windscreen
55/80W headlight bulb
Yamaha FZ1 mirrors/stalks on VTR bases
SuperBike bar-daytona bend
Moose racing risers (55mm)
Trimmed upper fairings for bar clearance
GSXR1000 M/C
Voltmeter
Sigma BC800 computer
Generic dial thermometer
Chrome bar ends (generic)
Vista throttle lock
Polished frame
VTEC VFR800 gas tank
GSXR frame sliders
Dyno-jet stage one jet kit
TPS mod
Custom Fram air filter
Plug pair valves
Gold valve covers
Gold clutch cover
Gold stator cover
SS dress engine bolts
GSXR750 Regulator/Rectifier
Slightly smaller battery
15t front sprocket
RK 530 Gold chain
CBR954 Penske shock/longer upper mount
Custom lowered footpegs
VTEC VFR seat
VTEC VFR seat Cowl
Undertail
LED tail lights
LED flushmount rear turnsignals
SS rear brake line
Hugger
CBR900RR Rear Wheel
Pirelli Diablo
Polished swingarm
RC51 stock exhaust w/partial bafflectomy
Custom metallic black paint
Custom/Tapeworks decals

I'm sure I'm forgetting something. MORE to come!

Nice list bling, you made me remeber I did my headlight too. Did marmaladeboy get your brace. How was that mod anyway?

Oh and hows your shock? I've been searching high and low for a shock, but I'm not paying $500 or more for one. I'm sure you know new ones go for $750 to $1200, Just don't have the scratch for that.

Mikstr, one of our forum Canuks, got it. Norrth had first dibs on it through the forum but Ebay wouldn't let me cancel the auction so Micky won it.

You can find used penske/ohlins on ebay under $500 but they aren't that common. Ohlins has a new VTEC VFR shock that is very close to VTR specs for around $550 NEW ($650MSRP)!!! What's the catch? No compression or external reservoir. It's still a quality unit. I had one on my O2 vfr.

I will eventually get my penske upgraded to the high/low compression model level and revalved for the 'hawk. Hopefully next year sometime.

Re: What have you done to your Hawk
 

wow, just wow :shock:

Mines still a work in progress but is nearly ready for next season.

list is my sig :)

all that a no pics??? lets see this Superhawk of Superhawks

Oh, I've posted pics before (heh,heh).

But I am a Superhawk newbie that just signed up a few weeks ago...throw me a bone here. PPLleeeeasee...it being the holidays and all

Just go to the performance mods section and look for any thread I've started. That should be a good start. :-)

Yeah my watch list has about 10 shocks on it right now and North is suposed to give me an email address for an ohlins for $450. Funds are tight though so something cheaper might have to be modded on there instead for now.

It looks like the older 748 duc shocks are real close fit, size and weight to the superhawk.

The spring is WAY too weak but it's easy to replace (no compressor needed) and it juuuussst fit with a longer top mount. I didn't like having the reservoir so close to the exhaust but that's only way it fit. Honda has heat deflectors on some of the VFR series bikes and I thought about getting one of those. The spring pictured is from a fox TC that came with the SuperHawk.

I gave up trying to get a used Duc Ohlins; bidding was always too high. Those Duc boys have got too much money! :lol: