superhawk Reborn
#1
superhawk Reborn
]Here are some pics of my ride let me know what yall think 1998 superhawk
trb pipescarbonfiber 2006 race upper andlower from a rc51 and it took for ever to match the paint graffics are still to come did the tps sensor update and noticed a huge differance
thanks for all the help
trb pipescarbonfiber 2006 race upper andlower from a rc51 and it took for ever to match the paint graffics are still to come did the tps sensor update and noticed a huge differance
thanks for all the help
Last edited by jdhawk; 10-07-2008 at 06:42 PM.
#5
Remember stock is BAD!
SuperSport
SuperSport
Join Date: Jun 2004
Location: Jacksonville FL
Posts: 760
I do like how your shawk looks, but I have to request that you post better pictures. Take some pictures during the day please!
Where did the headlight come from? I see that the stock marker light is still there. Do you notice a difference in heat from the farings?
Have you thought about shifting up the rads so that they fill the empty area in the farings, like the RC51 does?
Where did the headlight come from? I see that the stock marker light is still there. Do you notice a difference in heat from the farings?
Have you thought about shifting up the rads so that they fill the empty area in the farings, like the RC51 does?
#8
answers for everyone the headlamp is a projector from what I was told a BMW car
heat does not seem to be a problem at all so far. Sorry about the indoor pics hope to have a few good pics this weekend I noticed the rads set a bit low in the holes i am going to try a few differant mods to correct the issue. Oh and OTTO MAN thats no headlight opening that is where the air intake would be if these skins were on an RC51 but thanks to all for the input it gives me a few more ideas
heat does not seem to be a problem at all so far. Sorry about the indoor pics hope to have a few good pics this weekend I noticed the rads set a bit low in the holes i am going to try a few differant mods to correct the issue. Oh and OTTO MAN thats no headlight opening that is where the air intake would be if these skins were on an RC51 but thanks to all for the input it gives me a few more ideas
#14
Pics have to be resized. I use photobucket.com, it's free and easy to use. Then you just paste the link and (I think its called embedding) it shows up in your post.
So how did you do it? I know the RC is wider than the 'Hawk so does it look good from the cockpit too? It looks like you trimmed up the lower too. If you did a good how-to you wouldn't have a one of a kind anymore. Although a new member just bought one already done up in a RC51 costume.
So how did you do it? I know the RC is wider than the 'Hawk so does it look good from the cockpit too? It looks like you trimmed up the lower too. If you did a good how-to you wouldn't have a one of a kind anymore. Although a new member just bought one already done up in a RC51 costume.
#15
the fairing stays were swapped from left to right basicly turned upsidedown the right sets abit more forward than the left wich when bolted to the frame on opsite side just seems to fit well with these skins the cockpit looks like it was ment to be
#16
That's it? Just swap fairing stays (the little pieces of metal above the radiators?) and RC51 race fairings bolt on?