help with removeing handle bar
Thread Starter
Member
Squid
Joined: Mar 2010
Posts: 84
From: Boca Raton FL
help with removeing handle bar
HI. fellow SH Im currently repainting my bike and i wanted to paint my handle bar cause there have rust on then. how hard is it to take out the handle bars with out messing up any thing. also please can you point out thing i need to look out for ...... thank you
Senior Member
Back Marker
Joined: Aug 2007
Posts: 139
From: Mississippi
There are spring clips at the top of the fork tubes. These need to be removed. Throttle cables to be disconnected. Clutch and brake levers unbolted. Switches un screwed, phillips head from the bottom, 2 each. Un bolt handlebar(hex allen), Remove and repaint.
Hope I didn't forget anything.
Fish
Hope I didn't forget anything.
Fish
Thread Starter
Member
Squid
Joined: Mar 2010
Posts: 84
From: Boca Raton FL
There are spring clips at the top of the fork tubes. These need to be removed. Throttle cables to be disconnected. Clutch and brake levers unbolted. Switches un screwed, phillips head from the bottom, 2 each. Un bolt handlebar(hex allen), Remove and repaint.
Hope I didn't forget anything.
Fish
Hope I didn't forget anything.
Fish
Thread
Thread Starter
Forum
Replies
Last Post
Gabe
Modifications - Cosmetic
3
Apr 4, 2015 11:26 AM
