Got a problem. Anybody help?
:confused: Have anybody ever worked on a block for a VTR 1000 Super Hawk '98. I got a crack in the cylinder mid section from side to side that goes all the
way to the water jacket. Any suggestions? |
Sorry to say it brother, but you're looking at a new motor. Best off just getting one off ebay for about $600 and doing the complete swap, minus carbs and such which you may have tuned on your current bike anyway.
I just hate being the bearer of bad news..... |
You may be able to get the cylinder sleeved by a machine shop but its likely going to cost a good buck - you might be better off getting a good block or complete motor. Check your local engine rebuilding machine shops first and compare. Just my $.02
Rick B 02 SH |
Originally Posted by RickB
You may be able to get the cylinder sleeved by a machine shop but its likely going to cost a good buck - you might be better off getting a good block or complete motor. Check your local engine rebuilding machine shops first and compare. Just my $.02
Rick B 02 SH And for all of those who are reading this, that's what everybody else have said too. So if you ever find yourself with a cracked cylinder, you'll be better off buying a new block. Yep, it's that complicated for any machine shop to bore it out and resleeve it!![/COLOR] |
J-B Weld:-D
|
Originally Posted by 3D02
J-B Weld:-D
|
get a new motor and have fun with it. stock blocks don't go for that much I don't believe...
|
HERE YA GO.... Saw it on Ebay looking for a front wheel....
VTR1000 Motor, buy it now $595 http://cgi.ebay.com/ebaymotors/HONDA...QQcmdZViewItem |
All times are GMT -7. The time now is 10:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands