Billet pics
 

So I have been doing some machining and promised some people some pics so here they are

first couple pics are of my adjustble handle bars, basically a variation of convertibars, a very close variation lol

1st and 2nd pic- finished clamp and bar, bar isnt painted yet but eh whatever, clamp is 1" deep 6061 t6 al and the bar is .083 chromo tig welded

3rd pic- test fitting the design with a rapid prototyped clamp and a pvc handle bar with a 4* offset, was a little twitchy a speed but not bad, just kidding

4th pic- exhaust mounts for my two brothers (TBR) high mounts

5th pic is the led turnsignal housing for my R1, 6 wide angle led's per side, defiently not dot legal but better than nothing

6th pic- offset frame slider minus the peg

7th pic- ITS THE CHEESE

6th and 7th pic

Disclaimer: All parts were designed and machined by me, so take it with a grain of salt:D

Parts were designed in Disaster cam 9.1 and machined on a POS milltronics centurion 7:banghead:

Good work mate!

LOL! Looks like a terrorist!

Cool exhaust brackets. Love some for my Jardines.

dirka dirka ??









:p

I dig the exhaust brckets as well, very nice work.

Think you can mock up something like (a variation of course) heli bars, mirror extenders, or some other treat and sell them all to us at rock bottom prices?

Now thats a good idea...

actually....im a little strapped for cash so can I buy the PVC prototype....Ill just be gentle and not put any weight on it....haha

if i didnt get the material for free the green plastic for the rp'ed parts would cost about $150:shock:

The bars above are like heli bars, but much better since they can be adjusted a bunch of different ways