Anyone have these Jardine parts??
#1
Anyone have these Jardine parts??
Does anyone have 2 extra aluminum pieces that go in between the exhaust mount and the frame? There are 4 total, but I only need 2. The piece is the one that the bolt goes through to attach the exhaust. If you can help please let me know! Thanks in advance.
#8
Jardine Parts & Jardine Service
This is my first post to this great forum. The information found here has been extremely helpful. Have learned a lot about these fine machines and will post some of it after the riding weather ends.
As far as Jardine goes, they do not support their products very well. They told me I am out of luck on purchasing an inlet for the round carbon cans because they have not produced them in 4 years or so. Will be my last dealing with any of the Summit companies.
Anyone out there have a damaged round can? Looking for the inlet (part that goes between the pipe and can) as well as the internal baffle tube if possible. The Inlet is the most important.
Thanks in advance. DON'T WAIT TO UPGRADE THOSE CCTS TO SOLID ONES!
As far as Jardine goes, they do not support their products very well. They told me I am out of luck on purchasing an inlet for the round carbon cans because they have not produced them in 4 years or so. Will be my last dealing with any of the Summit companies.
Anyone out there have a damaged round can? Looking for the inlet (part that goes between the pipe and can) as well as the internal baffle tube if possible. The Inlet is the most important.
Thanks in advance. DON'T WAIT TO UPGRADE THOSE CCTS TO SOLID ONES!
#9
#10
Apparently what i need is a round Jardine can assembly from the pipe back. Looks like the baffle pipe is an integral part of the inlet. Need the whole thing but damage to the can or outlet tip would be fine. Anyone out there with a beat up set of round Jardine high mounts? The cans are 4" in diameter and 15 3/4 long. The important part is the inlet and inner baffle tube assembly, which slides onto the 2" midpipe.
I have a clean set of stock pipes as well as a banged up set of Yoshi Stainless/aluminum slip ons that I might consider trading.
I have a clean set of stock pipes as well as a banged up set of Yoshi Stainless/aluminum slip ons that I might consider trading.
#11
Jardine Sucks
The folks at D&D are awesome! They were able to sell me the internals that will work with my other brand mufflers for about a hundred bucks!
Here is their contact info:
Have A Great Day Ride Safe
NEVER Ride Faster Than YOUR Angel Can FLY
Leonard, Customer Service / Tech
817-834-0996
Sales: 817-834-8961
Fax: 817-831-4260
D&D Performance
2923 Edith Lane
Fort Worth, TX 76117
8:00 to 5:00 Texas Time Mon - Fri.
WWW.DANDDEXHAUST.COM <http://www.danddexhaust.com/>
danddexhaust@msn.com
Here is their contact info:
Have A Great Day Ride Safe
NEVER Ride Faster Than YOUR Angel Can FLY
Leonard, Customer Service / Tech
817-834-0996
Sales: 817-834-8961
Fax: 817-831-4260
D&D Performance
2923 Edith Lane
Fort Worth, TX 76117
8:00 to 5:00 Texas Time Mon - Fri.
WWW.DANDDEXHAUST.COM <http://www.danddexhaust.com/>
danddexhaust@msn.com
Thread
Thread Starter
Forum
Replies
Last Post
sorny
General Discussion
9
06-20-2013 02:06 PM