VTR Superbike top yoke
#1
VTR Superbike top yoke
Hello Folks,
I am selling a Superbike top yoke for the SuperHawk. I have been happily using that kit for the past few years, it provides, in my opinion, a vast improvement over the stock clip ons and even over helibars.
After trying several handlebars with various degrees of raise and bend, I settled for a flat bar. Beyond the position, it also has the advantage of fitting without the need to chop off the fairing ears. On the downside the forks need to be raised if you want to keep the stock master cylinders. I personally opted for radial MC that clear the forks.
Selling the top yoke only, it bolts on top of the stock yoke without modification.
Yours for $200
I am selling a Superbike top yoke for the SuperHawk. I have been happily using that kit for the past few years, it provides, in my opinion, a vast improvement over the stock clip ons and even over helibars.
After trying several handlebars with various degrees of raise and bend, I settled for a flat bar. Beyond the position, it also has the advantage of fitting without the need to chop off the fairing ears. On the downside the forks need to be raised if you want to keep the stock master cylinders. I personally opted for radial MC that clear the forks.
Selling the top yoke only, it bolts on top of the stock yoke without modification.
Yours for $200
#3
Hi, I could might be interested, what would the cost of sending it to Norway, (where I live) be ? Been looking at ebay for similar parts, as I wanna spare my shoulder of some stress and pain, on longer trips. If this is interesting let me know, and we could negotiate a deal !
#16
electrical and throttle fit on the dragbar without issue. I used SS brake lines but they are not custom fit just the regular ones for the Superhawk to I think there shouldn't be any problem there either.
The only challenge was that the fork tubes stick out of the yokes as this is where the clip ons are originally mounted. The stock master cylinders do not clear the fork tubes, so you can either lower the tubes, go for a slightly longer handlebar, maybe the renthal low profile, or go for radial MC as I did.
Overall it is a fairly easy mod and it makes the bike even more fun to ride.
The only challenge was that the fork tubes stick out of the yokes as this is where the clip ons are originally mounted. The stock master cylinders do not clear the fork tubes, so you can either lower the tubes, go for a slightly longer handlebar, maybe the renthal low profile, or go for radial MC as I did.
Overall it is a fairly easy mod and it makes the bike even more fun to ride.
Thread
Thread Starter
Forum
Replies
Last Post
flyjay66
Modifications - Performance
1
02-22-2009 07:54 AM