Hi Guys. I don't have my SH anymore and need to make room at my apt so here is a TARGA fiberglass full lower fairing, primed and ready to paint for only $80 plus shipping. Its in the box and ready to ship.
You'll get exactly what you see in the pics. There is one small crack that can be easily fixed/filled in the front edge. There are no repairs in the inside. There where a few scratches on the left side that I filled and sanded before priming. There is a picture for reference on a finished bike, that's not my bike but it is the same model Targa fairing. The brown spot in one of the pics is one of the bolt holes that was filled because was not going the be used. You can remove the filler and use it (can be easily removed), or keep it and paint it over.
Cheers, any questions ask.

I have no idea how much shipping will be, but the box is pretty big. I used the USPS calculator from home (MA) to CA for refence and came out at $107. If you know a cheaper/better shipping method please let me know when you message me. Thanks
I WILL POST MORE PICS ON A NEW POST SINCE I'M LIMITED TO 6 PICS

 

pm'd you about the lower fairing

 

is that 107 for shipping or total price with lower

 

I used the USPS online calculator to estimate shipping cost of the box to CA (from MA) just for reference and it came out at $107 Shipping Only.

I guess the only way to know how much shipping is will be to go to the post office with the box and address. Someone is already interested (in Canada) so I'm taking the box to USPS to check for shipping cost on Tuesday.

Cheers

 

You would be surprised at how cheep it is to send FedEx. The part isnt that heavy and the box looks like a reasonable size. I sent a Miata front subframe with them for only 40.00 Powerwashed it and wrapped it in shrink wrap. They stuck a label on it and off it went.

 

Thanks for the tip !

 

put me on the list, if the rest fall through. Shipping would be much cheaper to me, I'm in RI. Does it have the mount tabs?

 

I'll keep you second on the list. Only what is on the pics is included.
The fairing has 3 bolt holes and 2 clamps. 2 of the 3 holes take the stock bolts from the stock lower belly, and the 2 clamps grab on the upper fairing.
I was not going to use the 3rd bolt hole (that's why is filled on the pics). For using this hole you would need a metal stripe that bolts to one of the clutch cover bolts and you would need to make it yourself.