PARTING OUT THE REST OF THE BIKE
#1
evil man of nothing
MotoGP
Thread Starter
Join Date: Jan 2006
Location: Boynton Beach, FL
Posts: 4,484
PARTING OUT THE REST OF THE BIKE
PLEASE SEE THE UPDATED LISTS BELOW OF WHAT IS STILL AVAILABLE AND WHAT HAS ALREADY SOLD-PLEASE FEEL FREE TO MAKE ME AN OFFER ON ANY OF THE REMAINING PARTS IF YOU NEED SOMETHING
Once again bike was not a wreck-engine started right up but had a knock in the front cylinder. This was not my personal bike but I’ve seen and heard it on the road in the past on several occasions. However since I can’t give a personal history on each part everything is assumed to be in working order. Any damage other than normal wear I’ll try to photograph and note in the description. I’m usually pretty good but I am human so if I make a mistake don’t panic just let me know and I’ll make it right. Just ask questions and I'll be happy to answer.
I’m not a shop or a dealer. I just have too many projects and not nearly enough time so I’m parting this one out. I always do my best to try and price this stuff cheaper than anywhere else I’m able to find it, so while offers are still welcome please bear this in mind. Prices do not include shipping. Please only ask me to get you a shipping price if you're serious about buying something. Also due to past experience if you want something held until your next paycheck a deposit-doesn't have to be much-is required. Feel free to ask about anything else you don't see. Thanks!
WHAT IS STILL AVAILABLE:
Swingarm, gloss black powdercoat $45 (chain slider has been sold).
Front brake calipers and stock lines $40
Radiator fan-tested & working fine $20
R/R (stock unfinned) working fine. $10
Throttle cables and housing $10
Front brake master cylinder $25
Fuel tank sender $10
Clutch slave cylinder & line $10
ALREADY SOLD: Frame, Leovince exhaust, braided brake lines, carbon hugger, integrated taillight, tank, clutch and stator covers, carbs, windscreen, left & right fairings, fairing stay, fairing brackets, headlight & headlight fairing, right & left clipon, throttle & switch, left & right rearsets, undertail, mirrors, gauge cluster, wire harness/ecu/stator, clutch master cylinder, reservoir & lever, coils, forks/triples, front wheel, chin, sharkskinz solo tail, subframe, left & right radiators, custom seat, chain & sprockets, engine, rear caliper & pads, airbox & K&N, front brake master cylinder, reservoir & lever, front brake rotors, starter, hoses, sidestand, oil cooler/lines, swingarm chain slider, shock, lock set, oil pan, clutch basket/plates/etc, rear wheel/rotor, choke cables, front fender, stock exhaust header.
Please note some pictures show multiple items for simplicity. Also I've added a couple more parts to the list along the way so if there isn't a pic and you need one just ask. Also if you need them please ask for any necessary hardware/nuts/bolts and I'll be happy to either include them if I have them or at least attempt to try and find you some that work. Please do not assume they're included automatically. Thanks!
Once again bike was not a wreck-engine started right up but had a knock in the front cylinder. This was not my personal bike but I’ve seen and heard it on the road in the past on several occasions. However since I can’t give a personal history on each part everything is assumed to be in working order. Any damage other than normal wear I’ll try to photograph and note in the description. I’m usually pretty good but I am human so if I make a mistake don’t panic just let me know and I’ll make it right. Just ask questions and I'll be happy to answer.
I’m not a shop or a dealer. I just have too many projects and not nearly enough time so I’m parting this one out. I always do my best to try and price this stuff cheaper than anywhere else I’m able to find it, so while offers are still welcome please bear this in mind. Prices do not include shipping. Please only ask me to get you a shipping price if you're serious about buying something. Also due to past experience if you want something held until your next paycheck a deposit-doesn't have to be much-is required. Feel free to ask about anything else you don't see. Thanks!
WHAT IS STILL AVAILABLE:
Swingarm, gloss black powdercoat $45 (chain slider has been sold).
Front brake calipers and stock lines $40
Radiator fan-tested & working fine $20
R/R (stock unfinned) working fine. $10
Throttle cables and housing $10
Front brake master cylinder $25
Fuel tank sender $10
Clutch slave cylinder & line $10
ALREADY SOLD: Frame, Leovince exhaust, braided brake lines, carbon hugger, integrated taillight, tank, clutch and stator covers, carbs, windscreen, left & right fairings, fairing stay, fairing brackets, headlight & headlight fairing, right & left clipon, throttle & switch, left & right rearsets, undertail, mirrors, gauge cluster, wire harness/ecu/stator, clutch master cylinder, reservoir & lever, coils, forks/triples, front wheel, chin, sharkskinz solo tail, subframe, left & right radiators, custom seat, chain & sprockets, engine, rear caliper & pads, airbox & K&N, front brake master cylinder, reservoir & lever, front brake rotors, starter, hoses, sidestand, oil cooler/lines, swingarm chain slider, shock, lock set, oil pan, clutch basket/plates/etc, rear wheel/rotor, choke cables, front fender, stock exhaust header.
Please note some pictures show multiple items for simplicity. Also I've added a couple more parts to the list along the way so if there isn't a pic and you need one just ask. Also if you need them please ask for any necessary hardware/nuts/bolts and I'll be happy to either include them if I have them or at least attempt to try and find you some that work. Please do not assume they're included automatically. Thanks!
Last edited by captainchaos; 02-11-2013 at 07:14 AM.
#2
evil man of nothing
MotoGP
Thread Starter
Join Date: Jan 2006
Location: Boynton Beach, FL
Posts: 4,484
Still available: Sprocket cover.
Sold: coils, right rearset, hose set, chain & sprockets, starter, sidestand, shock, lock set, oil pan
Sold: coils, right rearset, hose set, chain & sprockets, starter, sidestand, shock, lock set, oil pan
Last edited by captainchaos; 10-27-2012 at 07:29 AM.
#7
evil man of nothing
MotoGP
Thread Starter
Join Date: Jan 2006
Location: Boynton Beach, FL
Posts: 4,484
On the contrary besides all the parts from this thing I actually only have a few stock take off parts off my own personal bike, a spare set of carbs I wanted to learn with, and a few spare exhausts I like to clean up and polish in my spare time (whenever that is). While I always seem to have one too many projects going at the same time I'm hardly a hoarder. The only thing I'm hoarding is my '98 along with years worth of aftermarket parts on it. Otherwise I sell everything I buy I get the feeling I bought something you needed in the past?
Last edited by captainchaos; 02-23-2012 at 08:30 PM.
#9
On the contrary besides all the parts from this thing I actually only have a few stock take off parts off my own personal bike, a spare set of carbs I wanted to learn with, and a spare exhaust or two I like to clean up and polish in my spare time (whenever that is). While I always seem to have one too many projects going at the same time I'm hardly a hoarder. I sell the **** I buy
#10
evil man of nothing
MotoGP
Thread Starter
Join Date: Jan 2006
Location: Boynton Beach, FL
Posts: 4,484
THAT I'm definitely guilty of...I have no defense Yes at one point or another I think I've owned almost every exhaust made for this bike lol. I guess I got in the habit of trying them out and shining them up and reselling them, especially when I had access to a tig welder during a class I took I liked fixing them. Always wanted to get real good and build my own...someday maybe...
#12
evil man of nothing
MotoGP
Thread Starter
Join Date: Jan 2006
Location: Boynton Beach, FL
Posts: 4,484
Hey your PM box is full. You mean the engine block? While I couldn't be sure I don't see why the block wouldn't be ok. The kid I bought it from said he took it to a mechanic and was told it had a bent valve. We spoke for quite awhile about alot of stuff besides the bike & I don't think he'd have any reason to lie to me. I haven't disassembled the engine but I guess I could when I have some time. Honestly if you wanted to pay the shipping and once you get it and inspect it pay whatever you think is fair I'm fine with that. If no one locally wanted it I was going to take it apart just to learn something then probably scrap it.
Last edited by captainchaos; 02-23-2012 at 08:47 PM.
#16
evil man of nothing
MotoGP
Thread Starter
Join Date: Jan 2006
Location: Boynton Beach, FL
Posts: 4,484
#19
evil man of nothing
MotoGP
Thread Starter
Join Date: Jan 2006
Location: Boynton Beach, FL
Posts: 4,484
Sales pending on front end assembly and front wheel. Lists updated as to what is still available and what is sold. Thanks everyone
Last edited by captainchaos; 03-04-2012 at 03:06 AM.
#30
evil man of nothing
MotoGP
Thread Starter
Join Date: Jan 2006
Location: Boynton Beach, FL
Posts: 4,484
The stock chin cowl is sold. I do have a Moriwaki carbon fiber lower that I didn't have listed. I bought it from a member on here awhile ago and will probably sell it if you're interested. It needs to be re-clear coated as he had stickers on it, cleared it, then peeled the stickers off leaving a subtle outline of the stickers in the clear. Otherwise it's in good shape.