Thumper996

i have both clip ons still.

supermarto

Thumper, I see someone asked about the right side radiator, but did you ever sell it? I am in need of the fan only, but I will buy the whole thing if need be. I am in Tarpon, not far from you at all so don't worry bout shipping, I'll come get it.

Thumper996

the fan just sold. sorry but i do still have both radiators

crazy1

do you have the rear master cyl., and resevior?

Thumper996

i believe i still do, i will check and see....... i want to apologize to anyone who is waiting on parts, i just got back my computer from the shop, some ******* gave me a virus and wiped everything. thanks

SteeksDeuce

I didnt have time to read all of the posts, Do you still have the stock Head pipes?? PM me if you do. Thanks.

Thumper996

i do but they leak a little bit at the S bends

E.Marquez

Please update this thread with what you do have available, the prices of each part, and shipping options.. That would be a great help to readers…

Thanks

Thumper996

motor minus one cylinder head
carbs
swingarm
sub frame
tail plastic
left and right clip on switches ( lights, signals and such)
air box
radiators
wiring harness
clear florida title frame
buyers are responsible for shipping. pm for prices

E.Marquez

Please post prices as per the rules for using the classifieds.

Thanks

Thumper996

swingarm 125
subframe 75
carbs 250
engine short block 250
rear tire and rim 150
air box 25
harness 100
clip on switches 30 a side
radiators 60 both
frame 300 obo
tail plastic 60

ranchomice

I need a motor minus heads! How did you lose your head gaskets? Any piston damage? These motors are a pain being the cylinder doesn't come off : / Where are you located?

Thumper996

im in st. petersburg fl, the pistons appear to be okay. it had good compression about 2 weeks before the gaskets went. cylinder walls look good. i would like 250 for the motor plus shipping. one cylinder head was sold, the other i still have. thanks

Thumper996

i found the compression numbers last night, the front cylinder was 173lbs and 168lbs in the front. this was using an auto zone compression tester. i dont know how accurate they are.

newleader

Hi pal.. do you still have a bottom fairing?... A Seat cowl? (the one that sits behind the seat, not under.. Clutch lever?... Thankx

Thumper996

sorry but those sold a while ago but thanks

viperslayer09

Ok question... do you still have any of the fairings for the bike? Or by chance the gas tank? and would you be willing to sell the left radiator separate from the right? Thanks.

Thumper996

all of the fairings have been sold sorry. the tank has been sold as well. i still have the radiators, the right has a dent the left is fine. make an offer on the left radiator plus shipping.

avramd

Hello,

Here's a little list of what I need or would like - none of this is on your list, but I thought I'd ask anyway incase this stuff is too trivial/obscure and you have it but didn't bother to list it:

Windscreen
Front right turn signal
front right footpeg
right handle bar end
right side-view mirror
right side transmission cover
brake pedal lever

Thumper996

sorry bud but all i have that you are looking for is the footpeg assembly, if you want it , make an offer. thanks

boxdogracing

Looking for a right side radiator. You said it had a dent, where/how bad. pics?

Stumpy

How about the clutch cover ?

supermarto

Thumper, do ya still have the cam chain tensioners on the motor, stock or aftermarket doesn't matter? I'll take them if you do.

j shizzy wizzy

Left side engine cover? what condition? can you send me some pics? thanks!

Thumper996

i still have 1 cam tensioner and still have the left side cover. make an offer will have pics up this weekend.

fpalbrecht

do you still have the rear under tail fender? Is it cut? If cut will stock rear turn signals still fit?

thusspakebenji

Are the tail plastics in good shape? If they are would you do 50 shipped?