part out or sale complete (checking interest)
02-04-2009, 01:56 PM
#1
Senior Member
Superstock
Thread Starter
Join Date: Jun 2006
Posts: 358
part out + NEW DEAL
99 black superhawk. phisically in mint condition. brand new conti sport tiress. D&D slipons. K&N. jet kit. ran great, lost a cct, and i think bent valves. trying to see if i should part it out and get something else or sale it complete or just fix it. also just installed a brand new D-VOLT gel cell battery. also have silver electrode plugs and thouse plug wires that have the capaciter built in for faster stronger spark, (forget the name but the same place makes them and the silver tip plugs)
post what you would be interested in and if i get enough interest i will tear it up.
if you see this, and i have sent you a price on something. take 10% off of that price if you can have the money to me in 5 days from now or less.
post what you would be interested in and if i get enough interest i will tear it up.
if you see this, and i have sent you a price on something. take 10% off of that price if you can have the money to me in 5 days from now or less.
Last edited by Zedicus; 02-05-2009 at 01:48 PM.
02-04-2009, 02:32 PM
#2
Member
Squid
Join Date: Feb 2008
Location: Statesville, NC
Posts: 93
I need a few pieces off the motor if you decide to part it. Spark plug wires, valve cover bolts, both side covers, hell if you're close enough I'll take the bad motor.
02-04-2009, 02:40 PM
#3
Senior Member
Back Marker
Join Date: Sep 2007
Location: Toronto, Ontario, Canada
Posts: 203
How about the carbs (carbs, choke cables and the little rubber thingys that attach them to the heads)? I'd be interested if the price is right. Let me know before we go any further with the other deal you and I are working on please.
Thanks.
Andrew
Thanks.
Andrew
02-04-2009, 02:50 PM
#4
Senior Member
SuperSport
Join Date: Jun 2008
Location: San Diego
Posts: 916
Location will help your sale
02-04-2009, 03:03 PM
#5
Super Byrd
Superstock
Join Date: Aug 2008
Location: Cumming, Ga
Posts: 356
Jet kit and D and D
02-04-2009, 03:41 PM
#6
Will drum for BBQ
Back Marker
Join Date: Jul 2008
Location: Kentucky
Posts: 166
Front rotors if they're good.
02-04-2009, 04:28 PM
#7
Senior Member
Superstock
Join Date: Nov 2008
Location: texas
Posts: 286
how much for all fairings?
02-04-2009, 05:09 PM
#8
Senior Member
Superstock
Thread Starter
Join Date: Jun 2006
Posts: 358
dang that was fast and most the bike is gone.
im in garden city KS. USA. i can ship to other countrys but do to my job it takes me a long time to get stuff that goes outside the US sent out.
inside the lower 48 goes out UPS and takes me a day or 2 to box up and ship.
let me get a pic up tonight and you can start making offers.
im in garden city KS. USA. i can ship to other countrys but do to my job it takes me a long time to get stuff that goes outside the US sent out.
inside the lower 48 goes out UPS and takes me a day or 2 to box up and ship.
let me get a pic up tonight and you can start making offers.
02-04-2009, 05:23 PM
#9
Senior Member
SuperSport
Join Date: Jun 2008
Location: San Diego
Posts: 916
Post the prices per the forum rules
02-04-2009, 06:04 PM
#10
Senior Member
Superstock
Thread Starter
Join Date: Jun 2006
Posts: 358
technically im asking 3500$ for the complete bike. if you want a part PM me and we can work it out. im not wanting gold out of this stuff so dont be afraid to ask about anything. the sooner this stuff is gone the sooner i can get something new.
02-04-2009, 06:08 PM
#11
Senior Member
Superstock
Thread Starter
Join Date: Jun 2006
Posts: 358
also the rear taillight has LED bulbs and a custom integrator, clear lense and the inside piece is black with metal flake. its fairly visible in daytime and looks awesome at night. front mirros have white leds in them for turn signals, the mirror is small and more useless then the stock mirror, it looks cool though so what else matters.
one more note, i can ship the complete engine. i just got a car engine freighted to me for 200$, and i have acces to a dock and truck. it costs more to do residential and if your out in the middle of nowhere they might not want to do a residential delivery.
one more note, i can ship the complete engine. i just got a car engine freighted to me for 200$, and i have acces to a dock and truck. it costs more to do residential and if your out in the middle of nowhere they might not want to do a residential delivery.
Last edited by Zedicus; 02-04-2009 at 06:11 PM.
02-04-2009, 06:44 PM
#12
Senior Member
Back Marker
Join Date: Jan 2009
Location: Hemet ,CA.
Posts: 167
i just fixed my bent valves ,did the work myself ,wasn't all that hard ,if you're mechnically inclined at all ,,parts only cost me 350.00 ,cycle-parts.com ,,
02-04-2009, 06:50 PM
#13
Senior Member
MotoGP
Join Date: Sep 2006
Location: Austin, Tx
Posts: 4,138
Just my curiosity but what was the mileage when it cratered?
02-04-2009, 06:56 PM
#14
Senior Member
Superstock
Thread Starter
Join Date: Jun 2006
Posts: 358
im mechanically inclined, you should see my garage.
about 16000 on the mileage
02-04-2009, 07:04 PM
#15
Moderator
MotoGP
Join Date: May 2005
Posts: 2,708
A VFR isn't anymore 2 up friendly that a VTR.
An RC51 doesn't even have a friendly seating position for 1 person.
An RC51 doesn't even have a friendly seating position for 1 person.
02-04-2009, 07:06 PM
#16
Member
Squid
Join Date: Feb 2008
Location: Statesville, NC
Posts: 93
my 1988 CBR100f with a Corbin Seat and Helibars is pretty 2 up friendly. But not quote the carver that the Superhawk is....
02-04-2009, 07:27 PM
#17
Super Byrd
Superstock
Join Date: Aug 2008
Location: Cumming, Ga
Posts: 356
cameron if you decide not to buy the fairings i'll take a look
02-04-2009, 07:49 PM
#18
Senior Member
Superstock
Join Date: May 2008
Location: S.Dak USA
Posts: 347
If you part it out.. dibs on the rear subframe.
02-04-2009, 09:08 PM
#19
Senior Member
Superstock
Thread Starter
Join Date: Jun 2006
Posts: 358
its parting out, replying and sending PM's. im TRYING to do this first come first serve so pm soon if you have any interest in something.
(im guessing im going to have nothing left but forks by the end of the month, you guys are like piranhas. )
(im guessing im going to have nothing left but forks by the end of the month, you guys are like piranhas. )
02-04-2009, 09:17 PM
#20
medium fast guy
Back Marker
Join Date: May 2008
Location: western MI, rust & pot hole capital of the world
Posts: 212
I am interested in the passenger pegs and brackets. Please advise. PM sent
02-05-2009, 05:22 AM
#21
Junior Member
Squid
Join Date: Aug 2008
Location: Moore, Oklahoma
Posts: 12
I'm interested in the mirrors and the K & N.
02-05-2009, 06:41 AM
#22
Post Whore Junior
MotoGP
Join Date: Nov 2006
Location: Triad, NC
Posts: 4,825
02-05-2009, 06:47 AM
#23
Senior Member
Superstock
Join Date: Jun 2008
Location: greeley, co
Posts: 283
did the front forks have any valve work done to them or are they just stock? If they have been worked over I'm interested in the complete front end.
02-05-2009, 07:18 AM
#24
Member
Squid
Squid
Join Date: Jan 2009
Location: Springfield, MO
Posts: 92
D&D's if the price is right
02-05-2009, 07:18 AM
#25
Junior Member
Squid
Join Date: Jan 2009
Location: Wichita, KS
Posts: 16
I would be interested in the flush mount turn signals. Also the pipes if they are still around
02-05-2009, 07:59 AM
#26
Senior Member
Superstock
Thread Starter
Join Date: Jun 2006
Posts: 358
i think the forks are bone stock. ive never been into them though.
(piranhas will eat one of there own under the right conditions, my friend has a tank full of them)
PLEASE send PM's i cant keep up with both this thread and what is getting sent into my inbox.
(piranhas will eat one of there own under the right conditions, my friend has a tank full of them)
PLEASE send PM's i cant keep up with both this thread and what is getting sent into my inbox.
02-05-2009, 09:09 AM
#27
Senior Member
Back Marker
Join Date: Sep 2007
Posts: 219
shoot me a PM with a price for the wheels.
02-06-2009, 07:30 PM
#28
Senior Member
Superstock
Thread Starter
Join Date: Jun 2006
Posts: 358
anything not sold by (or working on a deal) by monday is going on ebay soon. if you catch an auction and are a forum member mention it and i will work out some sort of discount for you guys.
thanx
thanx
02-06-2009, 07:42 PM
#29
Senior Member
MotoGP
Join Date: Aug 2007
Location: Way Out West
Posts: 2,547
Comfort for passenger I think the VFR wins. RC51 as a two up touring bike? Ha! Ha! Forget it!
02-07-2009, 11:54 PM
#30
Moderator
MotoGP
Join Date: May 2005
Posts: 2,708
Zedicus, It looks like interest has been well established... prices need to be posted per forum rules. Please start a new thread with a list of parts and prices. If you'd like to contiue using this thread please shoot me a pm when you have a price list together.
Last edited by inderocker; 02-07-2009 at 11:58 PM.
Thread
Thread Starter
Forum
Replies
Last Post
inderocker
Classifieds
59
04-17-2012 01:17 AM
