Lots of Parts
 

Hey all,

I have the following for sale. I am located in Ottawa, Ontario (K2M 3A5 - for those wishing to price their shipping) . If interested, please email or pm me. calitoz@ gmail. I prefer to deal locally but will ship according to your method of choice. Obviously, you pay for shipping. Paypal is fine. Remember funds are in USD.

sold pipes, clips on, sharkskin, rearsets and screen



Megacam Cams. According to the manufacturer, you will need new pistons and valves springs to run these. This is brand new.

VALVE LIFT DURATION AT .040"

In .450" 280°
ex .435" 272° $200

http://img234.imageshack.us/img234/8273/1hb8.th.jpg


New Factory Rear Sprocket still in plastic. 41 tooth chain size 530. $35

http://img59.imageshack.us/img59/1305/img0907bi7.th.jpg

Grab Bag. Most are new in plastic bag. I have no idea what some of these are so for $40, you get everything below.

http://img205.imageshack.us/img205/2843/7rc9.th.jpg http://img160.imageshack.us/img160/7550/8op0.th.jpg http://img206.imageshack.us/img206/7451/12qy3.th.jpg http://img238.imageshack.us/img238/5541/14vo4.th.jpg http://img238.imageshack.us/img238/2803/ab1yn9.th.jpg
and a set of stock tube spring. It had about 500kms on them. Plus plastic OEM chain guard.

info for the above courtesy of Hawkrider

"First pic is of a rear wheel collar for a CBR900RR, goes between the bearings
Second is a stock timing gear, probably replaced by a Factory Pro unit?
Dunno what the 6th pic is of
7th is of mirrors that are not off the VTR
8th is for ram air ducts for some other bike than the VTR."

Thanks for looking

I would like the rear sets please.

Paypal?

Thanks,

Doug

Super deal on the 'Skinz. Someone needs to jump all over that! I would but I've got the track plastic for the 1000RR.

Can you give some mor information about the cams?
lift and timing?

thanks

Info on the grab bag:

First pic is of a rear wheel collar for a CBR900RR, goes between the bearings
Second is a stock timing gear, probably replaced by a Factory Pro unit?
Third and fourth is a front brake lever
Fifth are the brackets for the fairing on the right side
Dunno what the 6th pic is of
7th is of mirrors that are not off the VTR
8th is for ram air ducts for some other bike than the VTR.

According to the sheet that came with the cams and the specifications on their site, it is as follows:

VALVE LIFT DURATION AT .040"

In .450" 280°
ex .435" 272°

it says Race profile - use modified pistons and springs in conjunction with these cams.

thanks...

Don't recognize a muffler bearing when you see one?

Everyone knows mufflers have to spin freely!

Nah, too small to be a muffler bearing. I thought it was the filler neck for the headlight fluid, but then I've always seen them made out of wood, not metal.





:)

In all seriousness, how small is it? It looks like it could be a spacer for the rear cowl maybe?

$350? $350??? If you told me $350 I would've bought them from you before, oh well. If you decide to break them up let me know I'll buy the tail from ya.

sorry, if I had known that you would have brought them for that price prior to me spending 3 days repairing and reinforcing them I would have sold it to you too....damn ...now I am sorry but I can't change the price now can I?:mrgreen:

good point...It is onlly 1" inner diameter so I think it is for something else

No worries, like I said let me know if you split 'em up. Good deal for someone though! Oops no I mean I would've waited then bought.

Nah, too small for that. It's large so obviously it's a muffler bearing or a power band. Tuff to call without a micrometer.

I want those exhaust cans.

location? so I may get shipping info

I'll second the bodywork. If you're willing to break 'em up, I'm interested in the lower.

Alright I got someone for the rear and lower....Someone want the top and we're all happy.

Im interested in the top do a lot of track days. How much with shipping Madison Wisconsin is real close to me.

Thanks
Stumpy

"Maybe the cams two. PM me ok thanks"

Since I just picked up a powerbronze hugger, I've included a plastic OEM chainguard in the grab bag. BTW...I am still trying to get shipping info for those who are interested.

33470 Let me know through PM what you'd want for the rear. Thanks.

Guys, can you work it amongst yourselves and make offers that will total the amount that I want for the Skinz? $350. I really don't want to part it but I understand that everyone needs a specific piece.

daedalusfalling - lower
superhawk22- rear
stumpy - top

guys?

Pm's have been sent.

Sorry guys, captainchaos just brought the whole skinz set...

You SOB Beau!! Good for you but now you're going to HAVE to come to the track with me! Glad you got the sale.

perhalps he'll sell it to you with minimal mark up:)

After the deal I gave him on the right side fairing he should give it to me free! :lol:

Yeah yeah, I know. I did do the dirty work though Mike-shipping wasn't cheap from Canada. I had bought that clean title frame for pretty cheap (I guess it was cheap considering motoconnection in Miami gets five times as much for a bookend with just a bill of sale) to make the front end swap easier. What I'd really like to find is a complete wrecked bike around here that I could pick up for cheap. Usually what needs replacing on something like that is the front end (I have the stock one coming off my current bike), and, hey, the bodywork, which I guess I'm pretty good at fixing and making nice and smooth right up to point it needs painting. From there my experience with doesn't extend beyond a spray can. Figure it would be a real nice project/learning experience to swap onto my frame and a real cool bike for track days. I'm way too big a pussy to take my current bike out onto the track-it is kinda nice. I see them all the time on ebay but shipping a bike kinda kills what otherwise might me a good deal. I'd LOVE to do some trackdays, just kinda sucks because I work two jobs and run a business as well, and weekends usually always include working too. Hoping to make a few changes in the not to distant future to free up some time to have some fun. In the meantime I get a little time here and there to work on my projects in the garage. Can't wait to show off the superhawk after I'm done swapping the front end and doing a couple other things to it.