looking for some parts please help
#1
looking for some parts please help
I am looking for some minor parts that i found already and some that i can't find very easily. I wanted to buy from anyone on here if they had them and wanted to sell. all for a 98 superhawk
Carbon Fiber Bar-Ends
Carbon fiber levers, clutch and brake (mainly the brake lever)
Carbon fiber mirrors
i don't need real carbon fiber just the fake stuff.
Erion Racing exhaust, right slip on. (this one is the toughest to find i called erion and they don't make them anymore and haven't found any on ebay yet.)
best way to paint the plastics if they are scratched up?
thanks for the help
Carbon Fiber Bar-Ends
Carbon fiber levers, clutch and brake (mainly the brake lever)
Carbon fiber mirrors
i don't need real carbon fiber just the fake stuff.
Erion Racing exhaust, right slip on. (this one is the toughest to find i called erion and they don't make them anymore and haven't found any on ebay yet.)
best way to paint the plastics if they are scratched up?
thanks for the help
Last edited by snowboarding_champ; 07-15-2008 at 12:32 PM. Reason: found the brake pedal
#2
AFAIK, no one makes carbon fiber bar ends, levers or mirrors specifically for the VTR and, if so, they would be so expensive most wouldn't purchase them. Magical racing has real CF mirrors for CBR's listed for $400.
Now if you are referring to fake CF, ebay is your friend. Boy, is it ever your friend.
Now if you are referring to fake CF, ebay is your friend. Boy, is it ever your friend.
#4
I have a set of mirrors for the superhawk with carbon fibre covers over the back..the left has some minor scratches on it from a tip over. I have both if your interested. Let me know. I can send you pics if you send me your email address.
#5
thanks but i am looking for more mint stuff. i dropped my bike last night doing stupid things and am trying to replace it all and upgrade some stuff. not looking for scuffed or scratched stuff but thanks for the help i appreciate it
#6
I have a brand new set of carbon fiber mirrors, PM me if you want them cheap, I can send picts if you want
Last edited by blackhawkrising34; 07-16-2008 at 07:40 PM.
#8
thanks for the help kinda looking for a set of levers the brake is the one that is scratched but the clutch is worn a little so i thought about replacing both of them.
#9
Sand and rattle can! That's what I did to mine using Krylon Fusion which is made for plastic. A good sanding (even though it says you don't have to) to remove the scuffs and a couple coats will provide an excellent shine and almost look factory. A clear coat would probably set it off. I'm not sure how hard it will be to match reds though. I bet grey would look good with the red stuff.
Thread
Thread Starter
Forum
Replies
Last Post
mcadena89
Technical Discussion
16
06-03-2009 12:04 AM