FS: Yoshimura Stage 1 cams (used)
#1
FS: Yoshimura Stage 1 cams (used)
I am selling the Yoshimura Stage 1 cams I had been running in my bike for a while. As some of you know, one of the said exhaust cams snapped in two but the other three are in excellent shape (tried to upload pics but Photobucket is being weird; PM me with e-mail for pics). The two intakes and the other exhaust are in great shape. While obviously one cannot install just three cams, I would recommend one of the following:
- install the two intakes only (stock exh. cams are decently aggressive anyhow) for a decent gain in power across the board
- send a stock core in with the "good" exhaust cam and have a copy (regrind) made (then you'll have a complete set; can't imagine it would overly expensive)
or, a combo of two above, install the intakes and sell the remaining one for someone else to do a regrind (given that both intake and exhaust cams have same spec, ie. 10.7mm lift and 250 degrees duration).
These have about 30K miles on them but are in great condition (regular oil changes,.....). They will come in the original box with the original spec sheet.
Asking: $225 plus shipping.
Thanks for looking
- install the two intakes only (stock exh. cams are decently aggressive anyhow) for a decent gain in power across the board
- send a stock core in with the "good" exhaust cam and have a copy (regrind) made (then you'll have a complete set; can't imagine it would overly expensive)
or, a combo of two above, install the intakes and sell the remaining one for someone else to do a regrind (given that both intake and exhaust cams have same spec, ie. 10.7mm lift and 250 degrees duration).
These have about 30K miles on them but are in great condition (regular oil changes,.....). They will come in the original box with the original spec sheet.
Asking: $225 plus shipping.
Thanks for looking
#2
Thread
Thread Starter
Forum
Replies
Last Post