FS ... Full Akrapovic System
08-25-2005, 08:42 PM
#1
Senior Member
Superstock
Thread Starter
Join Date: Mar 2005
Location: Seattle
Posts: 295
FS ... Full Akrapovic System SOLD!! thx SHF
I have a Full system that I'm taking off my bike.. It's a polished Titanium full Akrapovic system. This system sounds great and is super light. One of the cans has some very slight rash on it and the header has a small dent on the bottom of the pipe on the front cylinder (cannot see it unless you lay on the ground). I have some pics for tonight and will post pics of the system when I take it off this weekend.
$500 OBO for the whole set up.
$500 OBO for the whole set up.
08-25-2005, 08:44 PM
#2
Senior Member
Superstock
Thread Starter
Join Date: Mar 2005
Location: Seattle
Posts: 295
Re: FS ... Full Akrapovic System
more
08-25-2005, 08:47 PM
#3
Senior Member
Superstock
Thread Starter
Join Date: Mar 2005
Location: Seattle
Posts: 295
Re: FS ... Full Akrapovic System
more
08-25-2005, 08:50 PM
#4
Senior Member
Superstock
Thread Starter
Join Date: Mar 2005
Location: Seattle
Posts: 295
Re: FS ... Full Akrapovic System
Last for tonight
08-25-2005, 08:51 PM
#5
Senior Member
Superstock
Thread Starter
Join Date: Mar 2005
Location: Seattle
Posts: 295
Re: FS ... Full Akrapovic System
ehh.. one more
08-28-2005, 12:26 PM
#6
Senior Member
Back Marker
Join Date: Aug 2005
Posts: 200
Re: FS ... Full Akrapovic System
is ther a pic of the rash on the can, I don't really see it from the pics posted (i didn't open them up becasue I didn't see it on the thumbs). For sur ethe rash and dent is clear on the header.
Why are you selling? Just don't want to see the rash anymore? I've never heard of the brand, they weren't listed in the post that describes how loud the different slip ons were. What is you opinion on how loud they are?
Why are you selling? Just don't want to see the rash anymore? I've never heard of the brand, they weren't listed in the post that describes how loud the different slip ons were. What is you opinion on how loud they are?
08-28-2005, 07:02 PM
#7
Senior Member
Superstock
Thread Starter
Join Date: Mar 2005
Location: Seattle
Posts: 295
Re: FS ... Full Akrapovic System
I took it off because I went with a Wolf undertail.
I will post a pic of the cans on Monday. You can't see the rash on the pics because I swapped the cans around and put the rash on the inside.
The system is not super loud, but it does thump. It's alot more bassy than any other set I have heard. I think it's since the pipes are way bigger than stock headers. It also has a double crossover that helps scavenging.
Here is a pic of what I installed in place of the Ak.
I will post a pic of the cans on Monday. You can't see the rash on the pics because I swapped the cans around and put the rash on the inside.
The system is not super loud, but it does thump. It's alot more bassy than any other set I have heard. I think it's since the pipes are way bigger than stock headers. It also has a double crossover that helps scavenging.
Here is a pic of what I installed in place of the Ak.
08-29-2005, 11:12 AM
#8
Moderator
MotoGP
Join Date: May 2005
Posts: 2,708
Re: FS ... Full Akrapovic System
is ther a pic of the rash on the can, I don't really see it from the pics posted (i didn't open them up becasue I didn't see it on the thumbs). For sur ethe rash and dent is clear on the header.
Why are you selling? Just don't want to see the rash anymore? I've never heard of the brand, they weren't listed in the post that describes how loud the different slip ons were. What is you opinion on how loud they are?
Why are you selling? Just don't want to see the rash anymore? I've never heard of the brand, they weren't listed in the post that describes how loud the different slip ons were. What is you opinion on how loud they are?
08-29-2005, 12:30 PM
#9
Junior Member
Squid
Join Date: Aug 2005
Posts: 15
Re: FS ... Full Akrapovic System
is ther a pic of the rash on the can, I don't really see it from the pics posted (i didn't open them up becasue I didn't see it on the thumbs). For sur ethe rash and dent is clear on the header.
Why are you selling? Just don't want to see the rash anymore? I've never heard of the brand, they weren't listed in the post that describes how loud the different slip ons were. What is you opinion on how loud they are?
Why are you selling? Just don't want to see the rash anymore? I've never heard of the brand, they weren't listed in the post that describes how loud the different slip ons were. What is you opinion on how loud they are?
08-29-2005, 05:30 PM
#10
Senior Member
Superstock
Thread Starter
Join Date: Mar 2005
Location: Seattle
Posts: 295
Re: FS ... Full Akrapovic System
Ok.. here are the pics of the Damage on the cans .. It is not really noticable if you set the cans up so it's on the inside.
Also.. I think I'm asking too much for them anyway.. So , the price is now $500 for the whole setup.
And inderocker is right about the quality of these pipes. They are built really well and made out of the best materials possible. The fit is excellent and Leak free. The spring tensioners help keep everything nice and tight.
Also.. I think I'm asking too much for them anyway.. So , the price is now $500 for the whole setup.
And inderocker is right about the quality of these pipes. They are built really well and made out of the best materials possible. The fit is excellent and Leak free. The spring tensioners help keep everything nice and tight.
08-29-2005, 05:32 PM
#11
Senior Member
Superstock
Thread Starter
Join Date: Mar 2005
Location: Seattle
Posts: 295
Re: FS ... Full Akrapovic System
other angle
08-29-2005, 05:34 PM
#12
Senior Member
Superstock
Thread Starter
Join Date: Mar 2005
Location: Seattle
Posts: 295
Re: FS ... Full Akrapovic System
the whole system
08-29-2005, 05:39 PM
#13
Senior Member
Superstock
Thread Starter
Join Date: Mar 2005
Location: Seattle
Posts: 295
Re: FS ... Full Akrapovic System
This is the other can..
08-29-2005, 05:41 PM
#14
Senior Member
Superstock
Thread Starter
Join Date: Mar 2005
Location: Seattle
Posts: 295
Re: FS ... Full Akrapovic System
This the both cans.. they looked just fine on the bike.
08-29-2005, 05:43 PM
#15
Senior Member
Superstock
Thread Starter
Join Date: Mar 2005
Location: Seattle
Posts: 295
Re: FS ... Full Akrapovic System
other angle
08-29-2005, 05:46 PM
#16
Senior Member
Superstock
Thread Starter
Join Date: Mar 2005
Location: Seattle
Posts: 295
Re: FS ... Full Akrapovic System
Last one
08-29-2005, 06:55 PM
#17
Junior Member
Squid
Join Date: Jun 2005
Location: St. Louis, MO
Posts: 29
Re: FS ... Full Akrapovic System
I would be all over these if you weren't so far away. I'm just a little too leary of sending that kind of money that far....good luck, that is my idea of the perfect exhaust for the SuperHawks....
08-29-2005, 07:59 PM
#18
Senior Member
Superstock
Thread Starter
Join Date: Mar 2005
Location: Seattle
Posts: 295
I'm not going to rip anyone off if that's what you are afraid of. I'm being as honest as anyone can be about the condition of these pipes.
If you want my address and phone number I have no problem giving it out so you feel safer about making a trasnaction.
I understand being leary of internet sales since I have been burned in the past. It just makes you more careful who you deal with.
If you want my address and phone number I have no problem giving it out so you feel safer about making a trasnaction.
I understand being leary of internet sales since I have been burned in the past. It just makes you more careful who you deal with.
08-29-2005, 09:42 PM
#19
Senior Member
MotoGP
Join Date: Jan 2005
Location: Gainesville FLA.
Posts: 3,844
If I had the $ I'd buy it from you in a heart beat! Front end conversions add up though. 
08-30-2005, 10:26 AM
#20
Senior Member
Back Marker
Join Date: Jul 2005
Location: Utah
Posts: 146
Someone needs to jump on this deal! I wish I had $700 to buy them. Seriously that is a killer deal!
08-30-2005, 07:11 PM
#21
Senior Member
Superstock
Thread Starter
Join Date: Mar 2005
Location: Seattle
Posts: 295
The price is now $500 Utah 
08-31-2005, 07:15 AM
#22
Senior Member
Back Marker
Join Date: Jul 2005
Location: Utah
Posts: 146
Why would you do that to me? Now I'm all looking to see if I have $500! How much would shipping cost to 84107?
08-31-2005, 07:38 AM
#23
Senior Member
Superstock
Thread Starter
Join Date: Mar 2005
Location: Seattle
Posts: 295
I'll ship it for free.
08-31-2005, 08:05 AM
#24
Senior Member
Back Marker
Join Date: Jul 2005
Location: Utah
Posts: 146
Som-bitch! Temping bastard! Okay I was kidding that is an even better deal....ahhhh....! Do you take paypal?
P.S. I also have to check with the wife on this purchase since the SH is kind of her bike now...hehe....
! Do you take paypal?P.S. I also have to check with the wife on this purchase since the SH is kind of her bike now...hehe....
08-31-2005, 08:32 AM
#25
Senior Member
MotoGP
Join Date: Jan 2005
Location: Gainesville FLA.
Posts: 3,844
So you got yourself an RC51 Utah, I guess we can't talk to you any more. 
Very nice I'm just a little jealous, not much just a little. How do you like it?
Very nice I'm just a little jealous, not much just a little. How do you like it?
08-31-2005, 09:03 AM
#26
Senior Member
Back Marker
Join Date: Jul 2005
Location: Utah
Posts: 146
Oh come on now I still ride the SH, I took it out last night and listened to the clicky cam chains. The RC is a whole different beast! The way it corners in the canyons...yeah I love it. It sure isnt as comfy as the SH though.
08-31-2005, 12:18 PM
#27
Senior Member
Superstock
Thread Starter
Join Date: Mar 2005
Location: Seattle
Posts: 295
Re: FS ... Full Akrapovic System
I can do pay-pal. It will be my co-worker's account. So get the ole' ball and chain to give you the OK
09-01-2005, 07:12 AM
#28
Senior Member
Back Marker
Join Date: Aug 2005
Posts: 200
Re: FS ... Full Akrapovic System
Hey, If utah passes on them for what ever reason, please give me a shout. I am still interested....
Maybe a silly question but will the hraders start to rust where the dent and scatches are?
There is not rust on az components right now is there?
Maybe a silly question but will the hraders start to rust where the dent and scatches are?
There is not rust on az components right now is there?
09-01-2005, 07:43 AM
#29
Senior Member
Superstock
Thread Starter
Join Date: Mar 2005
Location: Seattle
Posts: 295
I doubt they will rust. Titanium does not corrode like steel does. If you keep the pipes clean and hit them with some polish once in a while they should look good forever.
09-02-2005, 05:15 AM
#30
Senior Member
Back Marker
Join Date: Aug 2005
Posts: 200
Re: FS ... Full Akrapovic System
Man! I just read my last post..... I wrote like an idiot! I was in a hurry and typing on a German keyboard. I'm sorry about that. Must have been fun to try to understand.
So, let me know if he falls through, like I said, I'm still interested.
I just read my last post..... I wrote like an idiot! I was in a hurry and typing on a German keyboard. I'm sorry about that. Must have been fun to try to understand. So, let me know if he falls through, like I said, I'm still interested.
