Freebie's
99 superhawk
Superstock
Joined: Jun 2011
Posts: 256
From: jasper Ga.
soooo....i dropped my poor ride this past weekend and when i was trying to bend my brake lever back i snapped it off (apparently all that time in the gym is paying off...that or aluminum is more brittle than i remember)...so now i'm riding with about an inch and a half of lever left......anybody got a lever they would be willing to part with???
99 superhawk
Superstock
Joined: Jun 2011
Posts: 256
From: jasper Ga.
needing a tank as mine was dented big time from previous owner (yellow if possible) lol
also in need of rear brake lever and need right front rotor (mine drags a little) .
I have some thrashed front stock turn signals (one has no lense) and wires were cut to use on new flush mounts. Haven't got anything else hawk related as yet.
I do have a Bikini Top for a 88yj wrangler though had on local classifieds $50.
also have a working 15cuft deep freezer for sale $100. or trade for parts (like a lower fairing kit , or better unthrashed cans)
also in need of rear brake lever and need right front rotor (mine drags a little) .
I have some thrashed front stock turn signals (one has no lense) and wires were cut to use on new flush mounts. Haven't got anything else hawk related as yet.
I do have a Bikini Top for a 88yj wrangler though had on local classifieds $50.
also have a working 15cuft deep freezer for sale $100. or trade for parts (like a lower fairing kit , or better unthrashed cans)
Last edited by wsharpman; May 9, 2012 at 05:32 PM.
Senior Member
SuperSport
Joined: Jul 2006
Posts: 655
From: Madison Wisconsin
Now What?
Squid
Joined: May 2012
Posts: 30
From: Washington State
Now What?
Squid
Joined: May 2012
Posts: 30
From: Washington State
Member
Squid
Joined: Feb 2009
Posts: 57
Looking for some passenger pegs and bolts. Lost mine when I moved. Please email me at gozuki@hotmail.com
Full Fledged Member
Squid
Joined: May 2009
Posts: 40
From: Belmont, New Hampshire
Got a couple extra front carb adapters, Ronayers part # 16214-MBO-000 Joint Boosters brand new in the bag for anyone that may need them. These are the adapters for setting up vacuum tubes for carb syncing. Send me a PM if you need one.
Member
Squid
Joined: Jul 2012
Posts: 48
From: Colorado Springs, CO
I don't know if this is where I should post, being a newb. I purchased a 2001 VTR1000F wrecked a few years ago, and I am just now getting around to trying to fix it. I am looking for what I believe is the Upper Fairing stay that hold the speedometer. I am willing to pay for this, am not looking for a freebee necessarily. Thank you in advance for any help someone can offer.
Please PM me,
~Jon
Please PM me,
~Jon
the boss
SuperBike
SuperBike
Joined: Mar 2010
Posts: 1,182
From: largo,fl
I don't know if this is where I should post, being a newb. I purchased a 2001 VTR1000F wrecked a few years ago, and I am just now getting around to trying to fix it. I am looking for what I believe is the Upper Fairing stay that hold the speedometer. I am willing to pay for this, am not looking for a freebee necessarily. Thank you in advance for any help someone can offer.
Please PM me,
~Jon
Please PM me,
~Jon
Junior Member
Squid
Joined: Aug 2012
Posts: 13
From: West Michigan
Am looking for a stock wind screen, stock undertail and rear plastic, don't really care about color. Just got this bike and it needs a bunch of work and the tail section has been hacked up so bad. Gonna do a more thorough rebuild of cosmetics this winter, just need something to get by with until then. Thanks in advance.
Escape Reality
SuperSport
Joined: Jun 2006
Posts: 612
From: KANATA, KANADA
Junior Member
Squid
Joined: Oct 2012
Posts: 22
From: Salt Lake City, UT
Hey! I just bought an 01 Hawk and I'm looking for a stator cover (doesn't have to look new just has to not leak like my current one does. Color also doesn't matter) and anyone's old seat. I know a bunch of the members here have upgraded, any of you have your old stock seat you'd be willing to part with?
