fiberglass cbr fairings fit to superhawk
#1
fiberglass cbr fairings fit to superhawk
i'll start off by saying if your looking for bolt-on and go parts these arent it! these fairings & mounts werent drawn in a cad program and cnc machined to exact tolerances, i built these with a tape measure and a hammer! that being said, i mated a 900rr tail, yamaha rx1 tailight and 600rr front fairings to my hawk, i cut up the stock subframe, made a diamond plate undertail, i run dirt bike bars so the front fairings are pretty tall, i could be tempted to sell the bar clamps i made as well, i put about 10,000 miles on this setup, and it shows! the tail is cracked from crashes and stress, the paint is scratched from use, etc, etc. this setup would be perfect if you had a track hawk or something, its going to require some fabrication to be in good shape, but it might be useful to someone? i dont know what its worth, but id like to think i could get $300? there jsut taking up space in the shop, so make me an offer
http://s1227.photobucket.com/albums/...rhawk%20parts/ <heres the photobucket album full of pics, you can see theres some issues, the under tail hits the hugger if you jump it, and the battery box has a tendency to pick up road crap
http://s1227.photobucket.com/albums/...rhawk%20parts/ <heres the photobucket album full of pics, you can see theres some issues, the under tail hits the hugger if you jump it, and the battery box has a tendency to pick up road crap
Last edited by big&little; 12-16-2010 at 07:13 AM.
Thread
Thread Starter
Forum
Replies
Last Post