custom mid mount MICRON pipes
#1
custom mid mount MICRON pipes
These are a set of micron cans with custom mid pipes. The mids set the cans higher up and at a different angle similar to an RC51. If any one is interested I'm looking to get $400+S&H for the set plus I'll give you the stock micron mid pipes.
#3
That is one good looking bike. What swing arm is that? How difficult of a job was it to put it on? Is the ground clearance better than stock pipes?
#4
The swingarm is a modified RC51 SP2 swingarm. It isn't that difficult now that I have the welding fixture and numbers need to do it, but the first time when I did my bikes it took a while to get everything rite.
As for the pipes the cans are mounted high than the standard low mount and you would touch the pegs before the pipes hit. I'm only looking to sell them to do an 04 GSXR tail conversion w/ an undertail exhaust system.
As for the pipes the cans are mounted high than the standard low mount and you would touch the pegs before the pipes hit. I'm only looking to sell them to do an 04 GSXR tail conversion w/ an undertail exhaust system.
#5
What condition are the exhaust mufflers and pipes in? Is the carbon in "like new" condition ... with no cracking, discoloration, or other issues? Is the packing intact?
How about the "custom" pipes? Are the welds "quality" welds? What material are the custom pipes made of? Do you have all of the original Micron hardware along with the original Micron pipes?
If you have any more detailed pictures (other than the thumbnails that you posted in the ad), could you send them to: duckzilla@msn.com
Sorry for all of the questions. I am interested in the exhaust, but when people mention "custom" it leaves the door wide open for what kind of fabrication has been done.
BTW ... What would shipping be to 80542?
Thanks.
How about the "custom" pipes? Are the welds "quality" welds? What material are the custom pipes made of? Do you have all of the original Micron hardware along with the original Micron pipes?
If you have any more detailed pictures (other than the thumbnails that you posted in the ad), could you send them to: duckzilla@msn.com
Sorry for all of the questions. I am interested in the exhaust, but when people mention "custom" it leaves the door wide open for what kind of fabrication has been done.
BTW ... What would shipping be to 80542?
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post