Bike and Mod's Going
 

Well, like so many others, life has put an unexpected smackdown on me and some things will just have to go. As some of you know I intended a fork swap, it’s all set to go but, as I’m forced to sell the hawk, I might as well keep it stock and sell off everything else. Let’s keep it civil, and call dibs with pm sent OK? So.. here goes.
98 Hawk with 34,000 miles, respectable cosmetic condition, some scrapes and chips and a crack in rear seat cowl on the underside. New mid season last year: Battery, Pirelli Diablo Corsa III’s front and rear, Vortex 520 15/43 chain conversion with X chain, APE cct’s, Custom fork brace (see in my profile), also have done the pair removal mod, the TPS set to 500 ohms, Haknslash LED taillight mod, carbs already have aftermarket needles and jets, and the rectifier has been replaced by P.O. with a finned unit. If a member buys it, the Corbin seat goes with, if it sells on CL, the stock goes with and I’ll post the seat after the sale is complete. Got it listed on CL for $2500.00, I’d go $2200.00 for any member, I’m in North Eastern CT.

More
 

Complete, Swap Ready, Mint RC51 forks with ohlins internals, new bushings and seals and ohlins oil, for 250lb rider, 929 lower tree and both RC51,(drilled for superbike bar mod), and 929 upper trees with new all balls tapered bearing set, includes 929 clip-ons,(Tabs removed and fresh gloss black powder coat) Mint CBR1000rr Front rim with new all balls bearings and proper spacers, with RC51 320mm rotors (freshly glass beaded on the pad surfaces) and a used Dunlop tire, F4i Calipers (Disassembled, cleaned, inspected and freshly powder coated, pads have life left, but I’d replace them )F4i Master Cylinder (integrated res.) ST1100 Clutch M/C (integrated res.), with levers, and, an RC51 fender (red, has two broken tabs, I made some Stainless brackets to repair it but haven’t finished that). $1000.00 Shipped

more
 

Modified F4i Rear shock with all new Race Tech internals and gold valve, new hyperco spring for 280 lb rider. New ohlins oil and nitrogen charged. $400.00 Shipped
Stock shock with two up hyperco spring, (got the spring from mikster) $75.00 shipped

more
 

Matching, Excellent condition CBR1000rr Rear Rim Complete with Rotor and Cush Drive, 190 Metzler Tire and very good 40 tooth 530 sprocket. $200.00 shipped or $150.00 If you buy either the forks, or, SP2 Swing arm.
2003 SP2 Swingarm, Good condition (currently has a spool tab that needs to be re-welded) with axle and spacers and caliper bracket. This has also been glass beaded. $250.00 Shipped.

more
 

Complete very good condition 929 Front end with Trees and bearings plus axle, Straight, (Checked myself with dial indicator and V blocks) $250.00 Shipped.

more
 

Stock VTR Top Tree Drilled for Superbike bar mod. $20.00 Shipped. SOLD
Pair of Polished Stainless mid pipes (a little rash on one, but buffed up decent). $30.00 Shipped. SOLD
Zero Gravity Smoke Touring Windscreen, excellent condition, and worked great for me. $70.00 Shipped.
China double bubble smoke wind screen, function was good, fit was meh, didn’t match the tips of the fairings. $25.00 shipped
Will post pic's as needed

Sorry for the tough luck - good luck on the sale

im interested in the wonderful chinese double bubble, do you have any shots of it installed so i can get an idea of how it fits?

PM send on the clip-ons.

I have a chinese DB on my bike and I was surprised at the quality. Its actually a well made windscreen.

Damn sorry to read you have to part with it. Best of luck with the sale and hopefully you can pick up another later on and start up where you left off.

cheers

P.S. Just wanted to note that the spring I sold you is made by Hyperpro and has a progressive rate

Sorry to hear about your turn of luck. I just hope we see you back here soon.... ;)

Thanks Guys, I'll still pop in and see who's diong what. Uchi, no I don't have a pic of it on the bike as I shortly after installed the touring shield.

Always sad to see someone having to sell but I'm sure the reason is far more important. I may be interested in the mid pipes, are they high mount?

Dibs on the mid pipes. pm sent

Cosean, they're mid's, and guy's, it's just age and abuse thats caught up to me with some severe back issues thats taking me off the bike, just have to drop back and punt, ya know? maybe it's time for that mid-life crisis muscle car I've allways wanted lol. Thanks all.

Up-Date VFR800 bars sold, Mid pipes and superbike bar mod top tree sold, Thanks all.

R6 RR
 

Forgot about the R6 RR I bought off here so.. $40.00 shipped
Thanks All

PM'd ya

Pm sent on 929 forks and RR

stebbdt,
I sorta know what you mean by mid life crisis :shock:, I lost my wife last Oct to cancer and starting dealing by trying to fill the hole with more bikes, thn wouldn't you know the friday right before the nicest weekend of the year AFTER the bikes were all clean and ready to ride I had a drop out of attic 10ft to concrete and shattered my right wrist and that has killed the bikes for the past month & 1/2 of course all beautiful weather but after a couple weeks it was killing me a the mid life set in and this is how I attempted to cure it. I'll admit it has worked some. ;) Wouldn't you know I can still work a clutch and shift with a cast but not a throttle:mad:. So don't worry it will all work out sooner or later.
Good Luck to you, and my cast should be off in a week or so so back to 2 wheels.

Rollin20z, sorry to hear of your loss, but, glad to hear you're working through the healing process, I've been married 36 years and know that the abyss would be deep if I lost her. Shortly your wrist will heal and be a dim memory, her memories will stay bright and true brother. God Bless.

What's still FS?

PM sent on the rear shock with racetech inners......

Safe to say that the forks are NOT available. Obvoiusly i am NOT Stebbdt, however i'm fairly sure i can relinquish this information on good authority...
I BOUGHT THEM!! They now have a permanent home on my '98 Firestorm in New Zealand. ;)

PM sent

windscreen still FS?