aftermarket parts extravaganza
Thread Starter
Senior Member
SuperSport
Joined: Apr 2013
Posts: 834
From: Thousand Oaks, CA
aftermarket parts extravaganza
decided to cut down to only 1 VTR after finding out this motor i was going to swap in was a dud (previous CCT failure) so im getting rid of some of the performance parts i have on this bike. all shipping will be added depending on location. im in Socal and will ship anywhere at the buyers expense.
i dont have most of the parts off the bike yet and will take them off as they sell as i already have pictures of most everything. i can take pictures of anything else upon request. let me know of any other parts you need as i have alot of parts. i just dont want to over do it in 1 post. after a few days everything will be put on flea bay.
RC51 SP1 front end ready to swap onto a hawk. Forks, triples, calipers, rotors, wheel, axle, fender, all ***** tapered steering bearings and clip on from a CBR 929 which have an inch or 2 of rise. includes all fasteners, bolts, nuts, spacers, bearing races, etc. $800 SOLD
Ohlins HO-701 triple clicker shock which had a full rebuild less than 1000 miles ago. the line to the preload adjust is missing its rubber coating but it wasnt worth it to replace the hose as it makes no difference. $550
Braced swingarm which has a CBR900 box style brace welded onto it. ready to mount up. also includes 900RR caliper bracket. has swing arm spools already added. also comes with an airtech hugger for a cbr900 as it fits the brace perfectly. i will not separate the swinger from the hugger. $300 SOLD
STG 1 regrind Webcam camshafts. grind #189 do not require aftermarket valve springs as was told to me by roger ditchfeild. $200 SOLD
Red HPower velocity stacks. $175 SOLD
2 sets of carbs, one with STG 3 jet kit installed. $80
other which i beleive to be stock $60
Magura Radial 190 master cylinder with kyle usa racing pinchbolt mount resevior. comes with spare lever. decided not to sell
Lightened flywheel done by E. Marquez to his lightest spec. $80 SOLD
also have 2 standard flywheels. $30 each
Galfer rear wave rotor. like new. $65 sold
CBR 900RR 6 spoke rear wheel, bolts right up to stock VTR parts. matches the SP1 front wheel perfectly. $50
red APE manual CCTs. $40 sold
2 sets of black pair block off plates. $10 a pair.
ZX14 Mosfet R/R. bought brand new. used for about a year. comes with eastern beaver connectors. $30 sold
black Danmoto adjustable rear sets. modified with a bolt through each one to fix the "loose" feeling they had. they are now solid. light road rash on one peg. $85 sold
engine cases with carbonadi carbon fibre / kevlar covers attached. since the means of attatching them is a special glue, you cant get them off so i have to sell them with the engine covers too. no road rash on them at all. $100 for both engine covers.
Hindle 20" round mufflers with high mount link pipes. used RC51 high mount hangers (included) but requires new holes drilled in subframe to mount. mufflers are in okay condition and have the usuall scrathes around the pipes where the hanger rubs. one muffler is newer than the other so they each have different style "hindle" logos on them because i had to replace on muffler after a low side. $200
coerce sprocket cover with all the hardware. $40 SOLD
T-Rex frame sliders. slight road rash on right side. no need to cut your fairing with these sliders. $40
Stock Forks. i dont know the history so a refresh is always good with suspension. $200
2 spare subframes. $30 each
Stock headers $30
pictured is an SP2 5 spoke wheel but i swapped it for a 6 spoke SP1 wheel to match the 6 spoke 900RR rear wheel. the SP1 wheel is what comes with the front end.
i dont have most of the parts off the bike yet and will take them off as they sell as i already have pictures of most everything. i can take pictures of anything else upon request. let me know of any other parts you need as i have alot of parts. i just dont want to over do it in 1 post. after a few days everything will be put on flea bay.
RC51 SP1 front end ready to swap onto a hawk. Forks, triples, calipers, rotors, wheel, axle, fender, all ***** tapered steering bearings and clip on from a CBR 929 which have an inch or 2 of rise. includes all fasteners, bolts, nuts, spacers, bearing races, etc. $800 SOLD
Ohlins HO-701 triple clicker shock which had a full rebuild less than 1000 miles ago. the line to the preload adjust is missing its rubber coating but it wasnt worth it to replace the hose as it makes no difference. $550
Braced swingarm which has a CBR900 box style brace welded onto it. ready to mount up. also includes 900RR caliper bracket. has swing arm spools already added. also comes with an airtech hugger for a cbr900 as it fits the brace perfectly. i will not separate the swinger from the hugger. $300 SOLD
STG 1 regrind Webcam camshafts. grind #189 do not require aftermarket valve springs as was told to me by roger ditchfeild. $200 SOLD
Red HPower velocity stacks. $175 SOLD
2 sets of carbs, one with STG 3 jet kit installed. $80
other which i beleive to be stock $60
Magura Radial 190 master cylinder with kyle usa racing pinchbolt mount resevior. comes with spare lever. decided not to sell
Lightened flywheel done by E. Marquez to his lightest spec. $80 SOLD
also have 2 standard flywheels. $30 each
Galfer rear wave rotor. like new. $65 sold
CBR 900RR 6 spoke rear wheel, bolts right up to stock VTR parts. matches the SP1 front wheel perfectly. $50
red APE manual CCTs. $40 sold
2 sets of black pair block off plates. $10 a pair.
ZX14 Mosfet R/R. bought brand new. used for about a year. comes with eastern beaver connectors. $30 sold
black Danmoto adjustable rear sets. modified with a bolt through each one to fix the "loose" feeling they had. they are now solid. light road rash on one peg. $85 sold
engine cases with carbonadi carbon fibre / kevlar covers attached. since the means of attatching them is a special glue, you cant get them off so i have to sell them with the engine covers too. no road rash on them at all. $100 for both engine covers.
Hindle 20" round mufflers with high mount link pipes. used RC51 high mount hangers (included) but requires new holes drilled in subframe to mount. mufflers are in okay condition and have the usuall scrathes around the pipes where the hanger rubs. one muffler is newer than the other so they each have different style "hindle" logos on them because i had to replace on muffler after a low side. $200
coerce sprocket cover with all the hardware. $40 SOLD
T-Rex frame sliders. slight road rash on right side. no need to cut your fairing with these sliders. $40
Stock Forks. i dont know the history so a refresh is always good with suspension. $200
2 spare subframes. $30 each
Stock headers $30
pictured is an SP2 5 spoke wheel but i swapped it for a 6 spoke SP1 wheel to match the 6 spoke 900RR rear wheel. the SP1 wheel is what comes with the front end.
Last edited by jscobey; Oct 13, 2014 at 09:49 PM.
Thread Starter
Senior Member
SuperSport
Joined: Apr 2013
Posts: 834
From: Thousand Oaks, CA
ill get some pics up. some small scratches on the down pipe from the front cylinder. no dents.
i also have another set that has a small dent on the bottom of the bend on the downpipe where it sometimes scrapes in hard right handers.
all PMs replied to thus far.
i also have another set that has a small dent on the bottom of the bend on the downpipe where it sometimes scrapes in hard right handers.
all PMs replied to thus far.
Thread Starter
Senior Member
SuperSport
Joined: Apr 2013
Posts: 834
From: Thousand Oaks, CA
to everyone who has boughten something from me. im doing my best to get everything off the bike and in the mail asap. im hoping to be able to get everything paid for so far boxed up and shipped by tomorrow but monday at the latest for sure. please bear with me. thanks gents.
Thread Starter
Senior Member
SuperSport
Joined: Apr 2013
Posts: 834
From: Thousand Oaks, CA
everything paid for thus far is boxxed up and ready to ship first thing in the morning! thanks for being patient everybody. mondays is really the only day i have to get to the post office. i will contact everyone with tracking numbers tomorrow.
Thread Starter
Senior Member
SuperSport
Joined: Apr 2013
Posts: 834
From: Thousand Oaks, CA
hey bud! sorry ive been getting bombarded with inqueries about items. hard for me to keep track of everything. here are those pics. headers are as good ive see used sets. no dents or dings. only a few light scratches on the bottom of the front down pipe where it sometimes scrapes in hard right hand turns which is common.
Thread Starter
Senior Member
SuperSport
Joined: Apr 2013
Posts: 834
From: Thousand Oaks, CA
so i didnt realize it was a holliday today and the post office was closed. its all going out first thing in the morning with tracking numbers via PMs. sorry guys. really appreciate your patience
