98 vtr1000 partout
#1
98 vtr1000 partout
Wwell didnt want to do this but its time parting out a mostly complete bike ran a little over a year ago but has been sitting since. has no frame all prices will be obo and can ship where ever prices do not include shipping all being shipped from phoenix AZ
$50-swingarm
$40-rear wheel
$25-rear shock
Sold-triple tree
Sold -handle bars
$sold-front forks
Soldfront wheel with rotors and brake calipers will split up as well tire is trashed
$sold shifterside-rider pegs
-$5-side stand
$300-engine or will sell parts off it if needed
$100-carburetors
$soldecu
Sold -gauges
$40-left radiator
$40-right radiator
$25-oil cooler
$sold-headlight
$150-gas tank has small dent no gas cap
$soldmirrors
$50-seat
$sold mufflers not sure if it stock or even the brand it was pretty deep sounding
Sold header
any other parts not listed just ask may have them do not have any fairings or the frame
$50-swingarm
$40-rear wheel
$25-rear shock
Sold-triple tree
Sold -handle bars
$sold-front forks
Soldfront wheel with rotors and brake calipers will split up as well tire is trashed
$sold shifterside-rider pegs
-$5-side stand
$300-engine or will sell parts off it if needed
$100-carburetors
$soldecu
Sold -gauges
$40-left radiator
$40-right radiator
$25-oil cooler
$sold-headlight
$150-gas tank has small dent no gas cap
$soldmirrors
$50-seat
$sold mufflers not sure if it stock or even the brand it was pretty deep sounding
Sold header
any other parts not listed just ask may have them do not have any fairings or the frame
Last edited by Emw2772000; 08-19-2016 at 12:38 PM.
#25
So after not getting a response since last week and considering I paid good money for this stuff with the specific condition that the parts were straight (thought that shouldn't even require mentioning)...
I like chocolate shakes but I've never seen one come out of a set of forks before. And the "it's just brake fluid from disassembly" turned into several days worth of scrubbing and schmutz removal from forks that have obviously been leaking for probably several years. Oh and thanks to whoever pounded & flattened the **** out of the top caps with a hammer (thankfully I have spare parts)... But I overlooked all that anyway and didn't say anything but...
-top triple is bent. I asked if this stuff was straight. All one has to do is hold it up and eyeball it.
-clutch cover has a big hole it in after the JB weld crumbled out... Maybe I'll JB weld it and pass it off on someone else (not)...
-since the top triple is bent the verdict I guess is still out on the forks, wheel and rotors.
Boggles my mind the descriptions/books I write of stuff and detailed pictures I take when I sell stuff and yet still from time to time have buyers bitch about the condition of things (usually Ebay, not here) when people sell stuff like this... Guess I get enough good deals on stuff that I'm gonna have to eat stuff like this from time to time, especially from the people who pop on here just to sell their stuff and then disappear.
I like chocolate shakes but I've never seen one come out of a set of forks before. And the "it's just brake fluid from disassembly" turned into several days worth of scrubbing and schmutz removal from forks that have obviously been leaking for probably several years. Oh and thanks to whoever pounded & flattened the **** out of the top caps with a hammer (thankfully I have spare parts)... But I overlooked all that anyway and didn't say anything but...
-top triple is bent. I asked if this stuff was straight. All one has to do is hold it up and eyeball it.
-clutch cover has a big hole it in after the JB weld crumbled out... Maybe I'll JB weld it and pass it off on someone else (not)...
-since the top triple is bent the verdict I guess is still out on the forks, wheel and rotors.
Boggles my mind the descriptions/books I write of stuff and detailed pictures I take when I sell stuff and yet still from time to time have buyers bitch about the condition of things (usually Ebay, not here) when people sell stuff like this... Guess I get enough good deals on stuff that I'm gonna have to eat stuff like this from time to time, especially from the people who pop on here just to sell their stuff and then disappear.
Last edited by captainchaos; 11-16-2016 at 09:12 AM.
#26
That sucks;;;
If you need OEM forks or triple , send me a PM.
If you need OEM forks or triple , send me a PM.
So after not getting a response since last week and considering I paid good money for this stuff with the specific condition that the parts were straight (thought that shouldn't even require mentioning)...
I like chocolate shakes but I've never seen one come out of a set of forks before. And the "it's just brake fluid from disassembly" turned into several days worth of scrubbing and schmutz removal from forks that have obviously been leaking for probably several years. Oh and thanks to whoever pounded & flattened the **** out of the top caps with a hammer (thankfully I have spare parts)... But I overlooked all that anyway and didn't say anything but...
-top triple is bent. I asked if this stuff was straight. All one has to do is hold it up and eyeball it.
-clutch cover has a big hole it in after the JB weld crumbled out... Maybe I'll JB weld it and pass it off on someone else (not)...
-since the top triple is bent the verdict I guess is still out on the forks, wheel and rotors.
Boggles my mind the descriptions/books I write of stuff and detailed pictures I take when I sell stuff and yet still from time to time have buyers bitch about the condition of things (usually Ebay, not here) when people sell stuff like this... Guess I get enough good deals on stuff that I'm gonna have to eat stuff like this from time to time, especially from the people who pop on here just to sell their stuff and then disappear.
I like chocolate shakes but I've never seen one come out of a set of forks before. And the "it's just brake fluid from disassembly" turned into several days worth of scrubbing and schmutz removal from forks that have obviously been leaking for probably several years. Oh and thanks to whoever pounded & flattened the **** out of the top caps with a hammer (thankfully I have spare parts)... But I overlooked all that anyway and didn't say anything but...
-top triple is bent. I asked if this stuff was straight. All one has to do is hold it up and eyeball it.
-clutch cover has a big hole it in after the JB weld crumbled out... Maybe I'll JB weld it and pass it off on someone else (not)...
-since the top triple is bent the verdict I guess is still out on the forks, wheel and rotors.
Boggles my mind the descriptions/books I write of stuff and detailed pictures I take when I sell stuff and yet still from time to time have buyers bitch about the condition of things (usually Ebay, not here) when people sell stuff like this... Guess I get enough good deals on stuff that I'm gonna have to eat stuff like this from time to time, especially from the people who pop on here just to sell their stuff and then disappear.
#28
I'm selling my forks, so my straight tripples are for sale. Hit me up if you are interested. You helped me in the past, so the best I can do is help you out.
This forum looks after each other.
This forum looks after each other.
Thread
Thread Starter
Forum
Replies
Last Post