1998 Superhawk parts FS
10-19-2012, 09:46 AM
#1
When in doubt, C4
Squid
Thread Starter
Join Date: Apr 2012
Location: Venice, FL
Posts: 72
1998 Superhawk parts FS
Just going to get these out of my way since I don't have a bike anymore. Parts were off my 1998 that I either replaced or upgraded. Prices are obo, shipping depends on size and weight.
Factory Pro Ti 1.1 jet kit w/ new spare 48 pilots (~1k miles if that) and stock needles (85k on stock). I believe I used the allen head bolts, but took out the kit and ran jetting via the Carb setup thread because I was hoping this would fix it. I ended up ordering all new OEM carb parts and 48 pilots.
$65 shipped -SOLD-
OEM taillight, no broken tabs, no scratches, scuffs or cracks $25 shipped. Bulbs and sockets included, so its plug and play. -SOLD-
OEM passenger pegs. $25 shipped. Welded my own muffler mounts and never had a passenger, so these were taken off.
OEM left switch housing. $20 shipped? Has the usual wear, but nothing broken, no wires stripped, worked great before I replaced it with a Euro housing to have the F2P mod.
OEM turnsignals, set of 4. No broken wires or missing connectors, come with mounting plates and nuts attached. Usual wear, but no cracks or deep scratches, some scuffs from what I looked at, rubber stems still good. $25 for the set shipped. -SOLD-
Let me know via PM on here so I can get those that ask first in order. Thanks!
Factory Pro Ti 1.1 jet kit w/ new spare 48 pilots (~1k miles if that) and stock needles (85k on stock). I believe I used the allen head bolts, but took out the kit and ran jetting via the Carb setup thread because I was hoping this would fix it. I ended up ordering all new OEM carb parts and 48 pilots.
$65 shipped -SOLD-
OEM taillight, no broken tabs, no scratches, scuffs or cracks $25 shipped. Bulbs and sockets included, so its plug and play. -SOLD-
OEM passenger pegs. $25 shipped. Welded my own muffler mounts and never had a passenger, so these were taken off.
OEM left switch housing. $20 shipped? Has the usual wear, but nothing broken, no wires stripped, worked great before I replaced it with a Euro housing to have the F2P mod.
OEM turnsignals, set of 4. No broken wires or missing connectors, come with mounting plates and nuts attached. Usual wear, but no cracks or deep scratches, some scuffs from what I looked at, rubber stems still good. $25 for the set shipped. -SOLD-
Let me know via PM on here so I can get those that ask first in order. Thanks!
Last edited by Sawzall86; 10-25-2012 at 11:13 AM.
10-25-2012, 11:17 AM
#6
When in doubt, C4
Squid
Thread Starter
Join Date: Apr 2012
Location: Venice, FL
Posts: 72
Payment received on Jet kit and sent out this morning, thanks again Wes!
Thanks for the feedback as well, Steve! Glad everything was to your liking and got there the same as I shipped it.
Updated my first post to show items sold.
Thanks for the feedback as well, Steve! Glad everything was to your liking and got there the same as I shipped it.
Updated my first post to show items sold.
10-31-2012, 01:02 PM
#8
SportTouring
Superstock
Join Date: Aug 2006
Location: Hawaii
Posts: 274
Aloha Sawzall86,
Received jet kit with everything pictured. Thanks for the careful packing.
Shipped Fast and Packed Well. Good Communication.
Hope all is going well with recovery. Also, hope bike matters are positive.
Take Care, Mahalo!
Received jet kit with everything pictured. Thanks for the careful packing.
Shipped Fast and Packed Well. Good Communication.
Hope all is going well with recovery. Also, hope bike matters are positive.
Take Care, Mahalo!
Thread
Thread Starter
Forum
Replies
Last Post
