All my VTR parts for sale: Hoarding relief
10-09-2013, 10:51 AM
#1
Senior Member
SuperSport
Thread Starter
Join Date: Jun 2010
Location: Baltimore, Maryland
Posts: 636
All my VTR parts for sale: Hoarding relief
I gathered a lot of parts in the few short years I own my superhawks. I don't have a complete bike anymore so there's no point in keeping all of these parts. All prices are without shipping
Link to the Photobucket Album with all of the pictures.
Moriwaki 11.2:1 compression forged pistons. Used about 16,000 miles. Involved in a CCT failure but took no visible damage. Ran again after valve repair. - $300
**SOLD**CBR1000rr complete front end***SOLD**
Like New OEM Mufflers. Were removed by original PO of one bike I had with very little miles. $180
Front Brakes complete sets. I thought they were both VTR sets but the gold ones are slightly different and they have different Master Cylinders. May need to identify the gold set first. Black set CBR F4I upgrade $75
VTR Carbs, good condition. Adjustable 6 position needles 185/180 main jets, 45s pilot jets. $100
Polished Two Bros Exhaust elbows. SOLD***
OEM VTR Rear Shock $25
VTR? Fans I think they're VTR but not positive. $30
Black leather tank braGood condition. A few small imperfections in the leather. $25
(1) Good OEM Clear Windscreens Left has a few more miles and wear $25. Right is SOLD
Good Right Radiator. $30 some bent fins. Maybe a core tube with a dent but no leaks.
OEM Lower triple clamp with stem (upper triple has sold) $20
Right clipon with brake Cyl, kill switch Broken lever $25
Instrument cluster with 26,xxxk miles, Clean Very nice condition overall. The speedo glass has 2-3 tiny micro cracks 1mm $125
Fairing stay looks straight. $25
Tail light Good condition $20
Red Front Fender Very clean no damage $30
OEM Airbox $30
Front wheel with rotors and *usable tire $150
Cylinder Heads Good rear head with valves $80. I gotta check the front head to make sure its good
Manual CCT from forum member keeping for current bike rebuild
OEM Rods $40
OEM Cams $60 for the set
OEM Cam Gears $40
Link to the Photobucket Album with all of the pictures.
Moriwaki 11.2:1 compression forged pistons. Used about 16,000 miles. Involved in a CCT failure but took no visible damage. Ran again after valve repair. - $300
**SOLD**CBR1000rr complete front end***SOLD**
Like New OEM Mufflers. Were removed by original PO of one bike I had with very little miles. $180
Front Brakes complete sets. I thought they were both VTR sets but the gold ones are slightly different and they have different Master Cylinders. May need to identify the gold set first. Black set CBR F4I upgrade $75
VTR Carbs, good condition. Adjustable 6 position needles 185/180 main jets, 45s pilot jets. $100
Polished Two Bros Exhaust elbows. SOLD***
OEM VTR Rear Shock $25
VTR? Fans I think they're VTR but not positive. $30
Black leather tank braGood condition. A few small imperfections in the leather. $25
(1) Good OEM Clear Windscreens Left has a few more miles and wear $25. Right is SOLD
Good Right Radiator. $30 some bent fins. Maybe a core tube with a dent but no leaks.
OEM Lower triple clamp with stem (upper triple has sold) $20
Right clipon with brake Cyl, kill switch Broken lever $25
Instrument cluster with 26,xxxk miles, Clean Very nice condition overall. The speedo glass has 2-3 tiny micro cracks 1mm $125
Fairing stay looks straight. $25
Tail light Good condition $20
Red Front Fender Very clean no damage $30
OEM Airbox $30
Front wheel with rotors and *usable tire $150
Cylinder Heads Good rear head with valves $80. I gotta check the front head to make sure its good
Manual CCT from forum member keeping for current bike rebuild
OEM Rods $40
OEM Cams $60 for the set
OEM Cam Gears $40
Last edited by 98VTRrider; 12-03-2013 at 08:19 PM.
10-09-2013, 04:36 PM
#2
Senior Member
SuperSport
Thread Starter
Join Date: Jun 2010
Location: Baltimore, Maryland
Posts: 636
Cbr1000 front end sold this afternoon
Polished two bros pipes sold pending payment
Polished two bros pipes sold pending payment
10-09-2013, 07:53 PM
#3
Senior Member
SuperSport
Join Date: Aug 2010
Location: Toronto, Ontario, Canada
Posts: 506
I'd go for the Two Brothers exhaust elbows if you can tell me what the diameter of the pipe is where it connects to the cans?
& the black calipers in the photobucket link appear to be F4i calipers & master cylinder.
Price and shipping to Toronto Ontario Canada, thanks
-Matt
& the black calipers in the photobucket link appear to be F4i calipers & master cylinder.
Price and shipping to Toronto Ontario Canada, thanks
-Matt
10-09-2013, 10:01 PM
#4
SportTouring
Superstock
Join Date: Aug 2006
Location: Hawaii
Posts: 274
Aloha,
If matt365 does not take the two bros elbows I may be interested.
Please P.M. me.
Mahalo.
If matt365 does not take the two bros elbows I may be interested.
Please P.M. me.
Mahalo.
10-10-2013, 02:45 AM
#5
road racer v2 power
Superstock
Superstock
Join Date: Jan 2011
Location: coventry england
Posts: 265
Dibs on the Red front fairing .
Any pics ?
Any pics ?
10-10-2013, 08:08 AM
#6
THE LANE CARVER
Superstock
Join Date: Aug 2012
Location: Houston TX
Posts: 271
I need full fairing, left hand radiator, gear shifter lever, and left foot stay assembly
10-10-2013, 08:14 AM
#7
THE LANE CARVER
Superstock
Join Date: Aug 2012
Location: Houston TX
Posts: 271
ha, I just looked at pics, I'll take left radiator
10-11-2013, 05:35 AM
#8
Junior Member
Squid
Join Date: Aug 2012
Location: Bethesda, MD (near DC)
Posts: 20
Sent PM for:
OEM Triples with stem and ignition(no key) $25
OEM Triples with stem and ignition(no key) $25
10-11-2013, 11:22 AM
#9
Senior Member
SuperSport
Thread Starter
Join Date: Jun 2010
Location: Baltimore, Maryland
Posts: 636
I'd go for the Two Brothers exhaust elbows if you can tell me what the diameter of the pipe is where it connects to the cans?
& the black calipers in the photobucket link appear to be F4i calipers & master cylinder.
Price and shipping to Toronto Ontario Canada, thanks
-Matt
& the black calipers in the photobucket link appear to be F4i calipers & master cylinder.
Price and shipping to Toronto Ontario Canada, thanks
-Matt
click the link above the list and there are a few pictures of the fender.. If you want more PM me and I'll get them... or send your ZIP and I'll get a shipping quote for it.
PM replied with shipping for the Upper Triple only as requested.
I do have more smaller items if there's something you need and don't see just ask.. I know I have some coils, a wire harness, OEM header, electronics like the Ignition box, starter solenoid, maybe a Regulator
10-12-2013, 06:05 PM
#10
Junior Member
Squid
Join Date: Oct 2013
Posts: 1
Good evening.
I am interested in your stock exhaust and the air box. Please advise if still available. Thanks.
Mike
mkoevenig@charter.net
I am interested in your stock exhaust and the air box. Please advise if still available. Thanks.
Mike
mkoevenig@charter.net
10-12-2013, 10:04 PM
#11
Senior Member
SuperSport
Thread Starter
Join Date: Jun 2010
Location: Baltimore, Maryland
Posts: 636
Good evening.
I am interested in your stock exhaust and the air box. Please advise if still available. Thanks.
Mike
mkoevenig@charter.net
I am interested in your stock exhaust and the air box. Please advise if still available. Thanks.
Mike
mkoevenig@charter.net
10-13-2013, 05:29 PM
#12
Senior Member
SuperSport
Join Date: Mar 2010
Location: Asheville, North Carolina
Posts: 949
Call Dibs on the OEM mufflers.. Could you check your PMs, Thank you..
10-16-2013, 07:05 AM
#13
Senior Member
SuperSport
Thread Starter
Join Date: Jun 2010
Location: Baltimore, Maryland
Posts: 636
10-16-2013, 07:27 AM
#14
Junior Member
Squid
Join Date: Aug 2012
Location: Bethesda, MD (near DC)
Posts: 20
top triple received, Thanks
10-16-2013, 07:29 AM
#15
Junior Member
Squid
Join Date: Jul 2013
Posts: 24
On the guage cluster, does the tach work? And how much for it?
10-16-2013, 08:36 PM
#16
Senior Member
SuperSport
Thread Starter
Join Date: Jun 2010
Location: Baltimore, Maryland
Posts: 636
10-25-2013, 01:04 PM
#17
Junior Member
Squid
Join Date: Jun 2012
Location: Daytona Beach, Florida
Posts: 4
I PMd you about the front stay on Wednesday. still available?
10-25-2013, 04:45 PM
#18
Senior Member
Back Marker
Join Date: Jul 2012
Location: Las Vegas, Nv
Posts: 171
have a starter by chance?
10-26-2013, 06:06 AM
#19
Member
Squid
Join Date: Oct 2013
Location: Kansas
Posts: 38
Is the front fender still available? How much shipped to 66221?
10-26-2013, 08:02 AM
#20
Thread Killer
SuperBike
Join Date: Apr 2013
Location: Geneseo, IL
Posts: 2,017
Did you get a chance to check that front head? Is it good and complete? I'm interested. Shipping to 61254? Thanks.
10-27-2013, 07:34 AM
#21
Senior Member
SuperSport
Thread Starter
Join Date: Jun 2010
Location: Baltimore, Maryland
Posts: 636
I was out camping in WV Wed-Sat, I'll start replying to questions with PM's today.
10-27-2013, 10:52 AM
#22
Member
Squid
Join Date: Oct 2013
Location: Huntington Beach, CA
Posts: 48
Gear shifter available?
10-27-2013, 11:30 AM
#23
Senior Member
SuperSport
Thread Starter
Join Date: Jun 2010
Location: Baltimore, Maryland
Posts: 636
10-27-2013, 05:01 PM
#25
Senior Member
SuperSport
Thread Starter
Join Date: Jun 2010
Location: Baltimore, Maryland
Posts: 636
Replied with quote
I do have a starter from my old motor, PM replied.
Yes still have it, PM sent with price.
I looked it over and it seems undamaged. PM sent
I do have a starter from my old motor, PM replied.
Yes still have it, PM sent with price.
I looked it over and it seems undamaged. PM sent
10-31-2013, 05:11 PM
#26
VTR1000Denver
Squid
Join Date: Sep 2013
Posts: 18
I gathered a lot of parts in the few short years I own my superhawks. I don't have a complete bike anymore so there's no point in keeping all of these parts. All prices are without shipping
Link to the Photobucket Album with all of the pictures.
Moriwaki 11.2:1 compression forged pistons. Used about 16,000 miles. Involved in a CCT failure but took no visible damage. Ran again after valve repair. - $300
**SOLD**CBR1000rr complete front end***SOLD**
Like New OEM Mufflers. Were removed by original PO of one bike I had with very little miles. $180
Front Brakes complete sets. I thought they were both VTR sets but the gold ones are slightly different and they have different Master Cylinders. May need to identify the gold set first. Black set CBR F4I upgrade $75
VTR Carbs, good condition. Adjustable 6 position needles 185/180 main jets, 45s pilot jets. $100
Polished Two Bros Exhaust elbows. SOLD***
OEM VTR Rear Shock $25
VTR? Fans I think they're VTR but not positive. $30
Black leather tank braGood condition. A few small imperfections in the leather. $25
(2) Good OEM Clear Windscreens Left has a few more miles and wear $25. Right is very nice and was in an aftermarket windscreen packaging, I think removed early on. $40
Good Right Radiator. $30 some bent fins. Maybe a core tube with a dent but no leaks.
OEM Lower triple clamp with stem (upper triple has sold) $20
Right clipon with brake Cyl, kill switch Broken lever $25
Instrument cluster with 26,xxxk miles, Clean Very nice condition overall. The speedo glass has 2-3 tiny micro cracks 1mm $125
Fairing stay looks straight. $25
Tail light Good condition $20
Red Front Fender Very clean no damage $30
OEM Airbox $30
Front wheel with rotors and *usable tire $150
Cylinder Heads Good rear head with valves $80. I gotta check the front head to make sure its good
Manual CCT from forum member $50
OEM Rods $40
Are carbs still 4sale?
OEM Cams $60 for the set
OEM Cam Gears $40
Link to the Photobucket Album with all of the pictures.
Moriwaki 11.2:1 compression forged pistons. Used about 16,000 miles. Involved in a CCT failure but took no visible damage. Ran again after valve repair. - $300
**SOLD**CBR1000rr complete front end***SOLD**
Like New OEM Mufflers. Were removed by original PO of one bike I had with very little miles. $180
Front Brakes complete sets. I thought they were both VTR sets but the gold ones are slightly different and they have different Master Cylinders. May need to identify the gold set first. Black set CBR F4I upgrade $75
VTR Carbs, good condition. Adjustable 6 position needles 185/180 main jets, 45s pilot jets. $100
Polished Two Bros Exhaust elbows. SOLD***
OEM VTR Rear Shock $25
VTR? Fans I think they're VTR but not positive. $30
Black leather tank braGood condition. A few small imperfections in the leather. $25
(2) Good OEM Clear Windscreens Left has a few more miles and wear $25. Right is very nice and was in an aftermarket windscreen packaging, I think removed early on. $40
Good Right Radiator. $30 some bent fins. Maybe a core tube with a dent but no leaks.
OEM Lower triple clamp with stem (upper triple has sold) $20
Right clipon with brake Cyl, kill switch Broken lever $25
Instrument cluster with 26,xxxk miles, Clean Very nice condition overall. The speedo glass has 2-3 tiny micro cracks 1mm $125
Fairing stay looks straight. $25
Tail light Good condition $20
Red Front Fender Very clean no damage $30
OEM Airbox $30
Front wheel with rotors and *usable tire $150
Cylinder Heads Good rear head with valves $80. I gotta check the front head to make sure its good
Manual CCT from forum member $50
OEM Rods $40
Are carbs still 4sale?
OEM Cams $60 for the set
OEM Cam Gears $40
10-31-2013, 05:12 PM
#27
VTR1000Denver
Squid
Join Date: Sep 2013
Posts: 18
Are the carbs still 4sale???
11-01-2013, 10:51 AM
#28
Senior Member
SuperSport
Thread Starter
Join Date: Jun 2010
Location: Baltimore, Maryland
Posts: 636
11-03-2013, 06:39 AM
#29
Member
Squid
Join Date: Jan 2012
Location: Vancouver, WA
Posts: 38
i need the frame under the seatthat the tail light fastens to and holds the seat on. i don't know what it's called.
11-03-2013, 08:06 AM
#30
Senior Member
SuperSport
Thread Starter
Join Date: Jun 2010
Location: Baltimore, Maryland
Posts: 636
