SuperHawk Forum - Pulling the stator

SuperHawk Forum (https://www.superhawkforum.com/forums/)

- Technical Discussion (https://www.superhawkforum.com/forums/technical-discussion-28/)

- - Pulling the stator (https://www.superhawkforum.com/forums/technical-discussion-28/pulling-stator-26156/)

3amta3

07-15-2011 07:12 PM

Pulling the ROTOR

has anyone pulled the rotor before? if so what did you use as a puller for it? i am thinking a 3/4 inch pipe with 15 count threads, does that sound about right?
any help would be good as i am going to pull it off tomorrow some how.

redhawk98

07-15-2011 10:39 PM

After you remove the cover, it is held by three bolts. Let'em loose and you're done. A no brainer.

3amta3

07-16-2011 05:53 AM

sorry i ment rotor...

8541Hawk

07-16-2011 10:27 AM

The flywheel is 22X1.5mm (I believe) not 3\4 NPT

You need to get the motion pro puller if you can't find the proper size bolt.

3amta3

07-16-2011 02:06 PM

anyone have one they want to send my way?

geekonamotorcycle

07-16-2011 03:15 PM

Are you certain your stator is your problem?

3amta3

07-17-2011 12:20 PM

it is the rotor not stator. and no that is not the problem, the problem is behind the rotor. the starter clutch and gears are the problem. i have checked everything else and it is the only thing left to look at.

K30	09-28-2011 06:32 PM

Whooop. Disregard.

All times are GMT -7. The time now is 06:40 PM.