Pads still dragging...
I picked up a 929 for track use and the front pads are dragging on the rotor - i can sitll spin the wheel but it takes some effort.
I took both calipers apart and cleaned EVERYTHING (re-used the original seals since they looked fine). Put the calipers back on, new pads, flush/bled - no change at all in the dragging. I'm kinda stumped... These are the same Nissin calipers on the 954 and RC51(?) so I'm sure somebody around here has experience with these units. thanks |
All times are GMT -7. The time now is 10:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands