MWR Racing filter development plans
Thread Starter
aka tony.mon, vtr1000.org
Squid
Joined: Mar 2009
Posts: 45
MWR Racing filter development plans
I have started development work with MWR Racing air filters, which have been used in bikes in a number of successful racing series, including the Isle of Man TT.
The design, using plates above the low-density foam element, allows maximum air flow, minimum resistance, and gains of 6-7BHP with corresponding torque gains.
The filter should be able to be used with tuned and standard engines, and would mean that the airbox lid could be disposed of, but the flow problems associated with taking off the airbox lid would not be experienced.
We need to be able to gauge how much interest there is for one of these, before MWR will be willing to continue development work.
Please have a look at the VTR1000 UK site to see what you think.
And register your interest on here if you would lie to be first in the queue.
Thanks,
Tony.mon (VTaRse on here- they wouldn't let me use that name on the VTR site!)
To find the info, I've posted what we propose on the VTR forum, have a look at:
VTR1000.org
and search for the thread:
MWR Racing filters
in the Bike Chat section.
The design, using plates above the low-density foam element, allows maximum air flow, minimum resistance, and gains of 6-7BHP with corresponding torque gains.
The filter should be able to be used with tuned and standard engines, and would mean that the airbox lid could be disposed of, but the flow problems associated with taking off the airbox lid would not be experienced.
We need to be able to gauge how much interest there is for one of these, before MWR will be willing to continue development work.
Please have a look at the VTR1000 UK site to see what you think.
And register your interest on here if you would lie to be first in the queue.
Thanks,
Tony.mon (VTaRse on here- they wouldn't let me use that name on the VTR site!)
To find the info, I've posted what we propose on the VTR forum, have a look at:
VTR1000.org
and search for the thread:
MWR Racing filters
in the Bike Chat section.
Senior Member
MotoGP
Joined: Apr 2005
Posts: 5,631
From: Montreal
Here you go gents, a pic of what these filters look like. They are said to work extremely well (based on what I have read).
Here is a link to their Web site:
http://racingairfilters.eu/?ids=kop1
and another to Tony's original post on the vtr1000.org site:
http://www.haymouth.co.uk/phpBB3/vie...66300f3ec8e147
Let's get some folks involved and get this thing off the ground......
Line starts here
Here is a link to their Web site:
http://racingairfilters.eu/?ids=kop1
and another to Tony's original post on the vtr1000.org site:
http://www.haymouth.co.uk/phpBB3/vie...66300f3ec8e147
Let's get some folks involved and get this thing off the ground......
Line starts here
Last edited by mikstr; Feb 3, 2012 at 06:07 PM.
Senior Member
SuperSport
Joined: Sep 2008
Posts: 805
From: Delmar NY
Old and dangerous
SuperSport
SuperSport
Joined: Jan 2012
Posts: 604
From: DFW Texas
Ha, well what was that wet stuff soaking me Saturday morning during my run? But you're right. I don't live in Texas because I like rainy days, lol. I live here for the 12 month riding season.
Senior Member
Superstock
Joined: Jul 2004
Posts: 442
From: Little Rock, AR
I'd imagine they're pretty water resistant if they develop/test in the UK.
I'm VERY curious about pricing, I don't see prices on the website for any filter. I agree, would definitely add room for the fuel tank upgrade. I wonder how it'd work with stacks also.
I'm VERY curious about pricing, I don't see prices on the website for any filter. I agree, would definitely add room for the fuel tank upgrade. I wonder how it'd work with stacks also.
Thread Starter
aka tony.mon, vtr1000.org
Squid
Joined: Mar 2009
Posts: 45
They've landed, and here's a pic or two with a bit more detail:
Side view, showing height. Leaves plenty of room for either a bigger airbox below or a bigger tank above....
DSCF00071.jpg?t=1329937452
View from below: full area foam element, so no probs with flow, hopefully.
DSCF00081.jpg?t=1329937363
And you can't deny they look good; laser cut logo and good quality.
DSCF00061.jpg?t=1329937504
Can't comment on cost yet; I'm nothing to do with selling them, that's down to the local authorised wholesaler.
But it looks pretty competitive, from UK pricing.
All depends on what gains you get.
And the reduction in intake noise is good, if you get out on tracks with a noise limit as we have on most tracks in the uk.
Side view, showing height. Leaves plenty of room for either a bigger airbox below or a bigger tank above....
DSCF00071.jpg?t=1329937452
View from below: full area foam element, so no probs with flow, hopefully.
DSCF00081.jpg?t=1329937363
And you can't deny they look good; laser cut logo and good quality.
DSCF00061.jpg?t=1329937504
Can't comment on cost yet; I'm nothing to do with selling them, that's down to the local authorised wholesaler.
But it looks pretty competitive, from UK pricing.
All depends on what gains you get.
And the reduction in intake noise is good, if you get out on tracks with a noise limit as we have on most tracks in the uk.
Senior Member
SuperSport
Joined: Sep 2008
Posts: 805
From: Delmar NY
Senior Member
SuperBike
Joined: Feb 2007
Posts: 1,252
From: boston
my bad didnt catch that one I got stuck looking at the pretty filters from the first link 
...
anyways, I figured it would need some serious dyno tuning giving all of the failed attempts of modifying the airbox that drastically that weve seen all too much of...
I think its a good design and I hope they can sort it out on the dyno because if this amount of air can be utilized positively it would be a great step up in our attempts to get more air and fuel into our gas gulpers in a reliable way.
...anyways, I figured it would need some serious dyno tuning giving all of the failed attempts of modifying the airbox that drastically that weve seen all too much of...
I think its a good design and I hope they can sort it out on the dyno because if this amount of air can be utilized positively it would be a great step up in our attempts to get more air and fuel into our gas gulpers in a reliable way.
Another OCMD victim...
Back Marker
Joined: Jan 2009
Posts: 118
From: Spain, Europe
i just stole the latest pic from their website, hope they dont mind....
the MRW looks awesome, but it appears they have a similar prob like running with a open lid, might be tricky to dial it in...
the MRW looks awesome, but it appears they have a similar prob like running with a open lid, might be tricky to dial it in...
