SuperHawk Forum - JE pistons and Stage 2 Cams

SuperHawk Forum (https://www.superhawkforum.com/forums/)

- Technical Discussion (https://www.superhawkforum.com/forums/technical-discussion-28/)

- - JE pistons and Stage 2 Cams (https://www.superhawkforum.com/forums/technical-discussion-28/je-pistons-stage-2-cams-34832/)

Bald Eagle

01-18-2018 05:25 AM

JE pistons and Stage 2 Cams

I am sure this has already been asked (cause I am still a SQUID) but is it safe to run JE Pistons (11.5:1) with Mori Stage 2 Cams without going too stupid with this modification. Also what would be the spark timing adjustment for the JE Piston compression to the original piston?
Thanks

mikstr

01-18-2018 05:46 AM

You may want to contact Roger Ditchfield of Revolution Racing in the UK for this type of information (he did development work on racing VTRs for both HRC and Moriwaki). Your main concern may turn out to be getting the crank to last as stock cranks running aggressive cams tend to let go...

8541Hawk

01-18-2018 09:53 AM

You will also need to source valve springs as STG2 cams will not work with the stock springs.

Bald Eagle

01-18-2018 02:44 PM

Quote:

Originally Posted by 8541Hawk (Post 405195)

You will also need to source valve springs as STG2 cams will not work with the stock springs.

I was going to get the springs from WebCam.

fabiostar

01-20-2018 08:15 AM

as above it will need the springs to stop it all getting a bit messy..

All times are GMT -7. The time now is 06:55 AM.