SuperHawk Forum

SuperHawk Forum (https://www.superhawkforum.com/forums/)
-   Technical Discussion (https://www.superhawkforum.com/forums/technical-discussion-28/)
-   -   Help with Idle speed (https://www.superhawkforum.com/forums/technical-discussion-28/help-idle-speed-8008/)

Randman 01-20-2006 05:47 PM

Help with Idle speed
 
I know I have seen this somewhere on here, but I can't find it now....
What should the RPM's be at idle?? Mine runs right at 1000 at idle....sounds like it should be higher....

TIA....

AZZKIKER 01-20-2006 05:51 PM

1200 rpms. The knob is on the right hand side below the side fairing and inside the frame, you can see it if you peek in there.

Randman 01-20-2006 07:26 PM

Re: Help with Idle speed
 
Cool, thanks for the info, and the location of the adjustment, that would have been my next newbie question :lol: :lol: I thought it was supposed to be higher than 1000....

jschmidt 01-20-2006 10:07 PM

Spec is 1100-1200. I run mine at 1300 and find it eliminates the clunk-die problem.

Randman 01-21-2006 07:50 AM

Re: Help with Idle speed
 
Yeah, I did see another post this morning that suggest setting it at 1300....Any reason you wouldn't do that??

cb21983 02-09-2006 10:35 AM

Re: Help with Idle speed
 
I had mine set at 1300 and it was to noisy at traffic lights to talk with my buddies. But I don't know if that is a reason you wouldn't want to do it??

JamieDaugherty 02-09-2006 02:38 PM

I run mine at 1000 without any problems. I think rought idle conditions have more to with out-of-sync carbs than anything else. Other out of tune issues can also be factors too.

Jamie Daugherty
http://members.iquest.net/~daugherj


All times are GMT -7. The time now is 09:46 PM.


© 2024 MH Sub I, LLC dba Internet Brands