Givi side rack adaptation
Hello,
As you already know, there is no side rack available. My bike already has a Givi top case rack, and after some thinking I got the idea of using a the rack for another model. I already got the side cases, and don't like big top cases. The cheapest I could find was PL7403- I'd bend the lower legs to align them with the passenger pegs screws, and I'd fit the top part to the existing givi rack, either by drilling a hole or using a screw steel band. Then the back would be the easiest to cut/extend. https://cimg3.ibsrv.net/gimg/www.sup...8f3b066377.jpg What do you think? Anyone tried this? |
2 Attachment(s)
I adapted my wingrack that I had on my F3. It fit pretty much straight on but some mods at the footpeg brackets. I made it way narrower by cutting the fairing and putting against the subframe.
This is with e21s but I have 2 e45s (45 liters each) that go on. If you have a mono rack now the wing racks are different, they incorporate all 3 racks. I have a monorack too but need the option of side cases. |
Turns out there is an universal givi rack available. GIVI SBL2000. Bad news- it's only available in Asia. Still searching for a shop with reasonable shipping charges to Europe...
|
I see them for sale a lot on the forums, like BARF, NESR, etc. Even on the ADV forum the change hands a lot.
|
All times are GMT -7. The time now is 03:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands