Exhaust studs - snapped
 

Fixing up the 1999 parts bucket. The front exhaust studs snapped on me. Honda does not list a seperate part number for the studs. Does anyone have any experience with these? Are they screw in or pressed into the cylinder? Fortunately about 1/2" of the studs are still exposed. BTW no issues with the rear studs. Thanks. JB

90035-MZ1-000

$4 at ronayers.com

They should thread in. Some PB Blaster and heating the cylinder head around the bolt should help.

wow thanks - servicehonda did not show them on the fiche - this is great! JB

They definitely screw in as I had one that was problematic as it wasn't ever fully seated (fixed it with some hi-temp Loctite).

Broken exhaust studs always suck. Hopefully you were using a torque wrench, or they broke taking the nuts off. Glad you at least have something to work with. Greg's suggestion of using PB Blaster is a good one. Great product.

They are in the fiche, #13 on the cylinder heads.

How the f did I miss that! Thanks Greg.

JB