Engine sounding different after CCT installation?
I've read many posts about "the bike" and "the exhaust" sounding different after manual CCT replacement. I did a Krieger CCT swap recently and I don't hear any difference at all, engine, exhaust, nothing. Hot or cold. I understand that a cold engine and a warm engine have different tolerances, but, enough to be able to hear the cam chains while the engine is running or to change the exhaust note? I DO have Jardine high exit pipes. They are on the loud side. I did not follow the Krieger directions. I used the sheet I found here. 4-7mm of chain slack....
|