CCT dimensions
Thread Starter
Senior Member
Superstock
Joined: Oct 2009
Posts: 325
From: MN
CCT dimensions
Hey guys on another forum for my KZ650 i came across a link to a guy who makes manual CCT's and i emailed him seeing if it would be possible to make one for our beloved hawk and he said that he had not made one YET but if i could supply him with some much needed data he would be more than willing to see what he could do, and the greatest part... only 30 bucks a pop!
so my question is does anyone have an old cct layin around that they could make some quick measurements for me on!?!
attached is the file i received from the guy and labeled are the measurements he needs to start making the product.
thanks fellas and i HOPE someone has a stocker laying around
so my question is does anyone have an old cct layin around that they could make some quick measurements for me on!?!
attached is the file i received from the guy and labeled are the measurements he needs to start making the product.
thanks fellas and i HOPE someone has a stocker laying around
Slacker
Superstock
Superstock
Joined: Jun 2005
Posts: 489
From: San Antonio, TX
Here is what I have measured. I started with the standard inches micrometer and had some problems, but after calibrating the metric gauge everything became clear.
Offset Plunger Body
A= 34.00 mm
B= 17.00 mm
C= 48.00 mm
D= 34.85 mm
E= 03.00 mm
F= 06.00 mm
G= 71.00 mm
H= 23.50 mm (Shaft Housing)
Offset Plunger Body
A= 34.00 mm
B= 17.00 mm
C= 48.00 mm
D= 34.85 mm
E= 03.00 mm
F= 06.00 mm
G= 71.00 mm
H= 23.50 mm (Shaft Housing)
Senior Member
Back Marker
Back Marker
Joined: Mar 2009
Posts: 139
From: Wisconsin
I made about 10 sets last year on my cnc at work but never really did anything with them. I installed a set on my bike and that's it. If you can get him to make them, is that $30 each or a set?
Thread Starter
Senior Member
Superstock
Joined: Oct 2009
Posts: 325
From: MN
i believe that he said it would be 30 for the set but even if its a piece
still cheaper than apes
Thread
Thread Starter
Forum
Replies
Last Post
Crashrat
Classifieds
40
Oct 11, 2012 08:25 PM
